PartsTable
Technical Data Sheet
Download PDF

102955PS — BRACKET,ANGLE

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

102955PS: BRACKET,ANGLE.

The BRACKET,ANGLE is a the manufacturer industrial component. Key specifications include first_leg_angle: 90.0 DEGREES NOMINAL, first_leg_style: SQUARE, first_leg_width: 6.750 INCHES NOMINAL IN, special_features: PART OF REAR PASSENGER SEAT P/N 153866-197197N; TM 9-2320-360-24P FIG 212, style_designator: ANGLE, end_item_identification: NSN 2320-01-318-9902 HET (HEAVY EQUIPMENT TRANSPORTER).. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-386-2116, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
102955PS
NSN: 5340-01-386-2116
FSC: 5340 — Hardware, Commercial
CAGE: 09704 — SEATS INC DIV SEATS INCORPORATED (USA)
SPECIFICATIONS
first_leg_angle90.0 DEGREES NOMINAL
first_leg_styleSQUARE
first_leg_width6.750 INCHES NOMINAL IN
special_featuresPART OF REAR PASSENGER SEAT P/N 153866-197197N; TM 9-2320-360-24P FIG 212
style_designatorANGLE
end_item_identificationNSN 2320-01-318-9902 HET (HEAVY EQUIPMENT TRANSPORTER).
first_leg_hole_arrangement_styleTWO HOLES
second_leg_relationship_to_first_legNOT IDENTICAL
part_name_assigned_by_controlling_agencyBACK SEAT HINGE,LEFT HAND
NSN5340-01-386-2116
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 102955PS MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
FIRST LEG ANGLE: 90.0 DEGREES NOMINAL
•
SECOND LEG RELATIONSHIP TO FIRST LEG: NOT IDENTICAL
•
FIRST LEG HOLE ARRANGEMENT STYLE: TWO HOLES
•
STYLE DESIGNATOR: ANGLE
•
FIRST LEG STYLE: SQUARE
•
FIRST LEG WIDTH: 6.750 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
FIRST LEG ANGLE90.0 DEGREES NOMINAL
SECOND LEG RELATIONSHIP TO FIRST LEGNOT IDENTICAL
FIRST LEG HOLE ARRANGEMENT STYLETWO HOLES
STYLE DESIGNATORANGLE
FIRST LEG STYLESQUARE
FIRST LEG WIDTH6.750 INCHES NOMINAL IN
SPECIAL FEATURESPART OF REAR PASSENGER SEAT P/N 153866-197197N; TM 9-2320-360-24P FIG 212
PART NAME ASSIGNED BY CONTROLLING AGENCYBACK SEAT HINGE,LEFT HAND
END ITEM IDENTIFICATIONNSN 2320-01-318-9902 HET (HEAVY EQUIPMENT TRANSPORTER).
SUBSTITUTES & CROSS-REFERENCES 1
102955Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 102955PS?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 102955PS?
102955PS is a BRACKET,ANGLE.
What parts can replace 102955PS?
There is 1 known substitute for 102955PS: 102955. Substitute compatibility should be verified for your specific system.
What is the NSN for 102955PS?
102955PS is cataloged in the U.S. Government catalog under NSN 5340-01-386-2116. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 102955PS