PartsTable
Technical Data Sheet
Download PDF

102914 — RETAINER,ELECTRICAL CONNECTOR

✓ Government record, cited
— · MRO · MRO_GENERAL
PRODUCT OVERVIEW

102914: RETAINER,ELECTRICAL CONNECTOR.

The RETAINER,ELECTRICAL CONNECTOR is a the manufacturer industrial component. Key specifications include material: RUBBER OVERALL, head_style: SQUARE, head_height: 0.141 INCHES NOMINAL IN, point_style: CONE, thread_class: 2A A, hole_diameter: 0.250 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN. This part is cataloged in the U.S.

Government catalog under NSN 5305-00-010-2914, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 102914
NSN: 5305-00-010-2914
NIINs: 000102914, 004326129, 009715652, 015967874
FSC: 5305 — Screws
CAGE: 21450 — ARMY WEAPONS COMMAND ATTN AMSWE-REE-S (USA)
SPECIFICATIONS
materialRUBBER OVERALL
head_styleSQUARE
head_height0.141 INCHES NOMINAL IN
point_styleCONE
thread_class2A A
hole_diameter0.250 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
overall_width2.625 INCHES NOMINAL IN
thread_length0.417 INCHES MINIMUM IN
aperture_width1.375 INCHES NOMINAL IN
overall_length5.125 INCHES NOMINAL IN
aperture_length3.875 INCHES NOMINAL IN
fastener_length0.500 INCHES NOMINAL IN
NSN5305-00-010-2914
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: 102914 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
HEAD HEIGHT: 0.141 INCHES NOMINAL IN
•
FASTENER LENGTH: 0.500 INCHES NOMINAL IN
•
THREAD LENGTH: 0.417 INCHES MINIMUM IN
•
HARDNESS RATING: 38.0 ROCKWELL C MINIMUM AND 43.0 ROCKWELL C MAXIMUM OVERALL
•
NOMINAL THREAD DIAMETER: 0.190 INCHES IN
•
FEATURES PROVIDED: CASEHARDENED
•
HEAD STYLE: SQUARE
•
THREAD DIRECTION: RIGHT-HAND
TECHNICAL CHARACTERISTICS
HEAD HEIGHT0.141 INCHES NOMINAL IN
FASTENER LENGTH0.500 INCHES NOMINAL IN
THREAD LENGTH0.417 INCHES MINIMUM IN
HARDNESS RATING38.0 ROCKWELL C MINIMUM AND 43.0 ROCKWELL C MAXIMUM OVERALL
NOMINAL THREAD DIAMETER0.190 INCHES IN
FEATURES PROVIDEDCASEHARDENED
HEAD STYLESQUARE
THREAD DIRECTIONRIGHT-HAND
POINT STYLECONE
WIDTH BETWEEN FLATS0.188 INCHES NOMINAL IN
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 102914?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 102914?
102914 is a RETAINER,ELECTRICAL CONNECTOR. It is classified as a MRO (MRO_GENERAL).
What is the NSN for 102914?
102914 is cataloged in the U.S. Government catalog under NSN 5305-00-010-2914. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 102914

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.