PartsTable
Technical Data Sheet
Download PDF

10289LUPH1L5 — SEAL,PLAIN

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

10289LUPH1L5: SEAL,PLAIN.

The SEAL,PLAIN is a the manufacturer industrial component. Key specifications include material: RUBBER SYNTHETIC SEALING ELEMENT, seal_width: 0.375 INCHES NOMINAL IN, construction: SOLID, housing_bore_diameter: 3.000 INCHES NOMINAL IN, accommodated_shaft_diameter: 2.250 INCHES NOMINAL IN, cross-sectional_shape_style: SINGLE LIP. This part is cataloged in the U.S.

Government catalog under NSN 5330-00-071-6646, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
10289LUPH1L5
NSN: 5330-00-071-6646
FSC: 5330 — Packing and Gasket Materials
CAGE: 48482 — PARKER-HANNIFIN CORPORATION DBA PNEUTRONICS DIV ENGINEERED POLYMER SYSTEMS (USA)
SPECIFICATIONS
materialRUBBER SYNTHETIC SEALING ELEMENT
seal_width0.375 INCHES NOMINAL IN
constructionSOLID
housing_bore_diameter3.000 INCHES NOMINAL IN
accommodated_shaft_diameter2.250 INCHES NOMINAL IN
cross-sectional_shape_styleSINGLE LIP
NSN5330-00-071-6646
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 10289LUPH1L5 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SEAL WIDTH: 0.375 INCHES NOMINAL IN
•
HOUSING BORE DIAMETER: 3.000 INCHES NOMINAL IN
•
CROSS-SECTIONAL SHAPE STYLE: SINGLE LIP
•
ACCOMMODATED SHAFT DIAMETER: 2.250 INCHES NOMINAL IN
•
MATERIAL: STEEL SPRING
•
CONSTRUCTION: SOLID
TECHNICAL CHARACTERISTICS
SEAL WIDTH0.375 INCHES NOMINAL IN
HOUSING BORE DIAMETER3.000 INCHES NOMINAL IN
CROSS-SECTIONAL SHAPE STYLESINGLE LIP
ACCOMMODATED SHAFT DIAMETER2.250 INCHES NOMINAL IN
MATERIALSTEEL SPRING
MATERIALRUBBER SYNTHETIC SEALING ELEMENT
CONSTRUCTIONSOLID
OTHER ITEMS IN FSC 5330 — Packing and Gasket Materials
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5330-00-000-0085 5330-00-000-0167 5330-00-000-5275 5330-00-001-1260 5330-00-001-1833 5330-00-001-1844 5330-00-001-1845 5330-00-001-1846
SUBSTITUTES & CROSS-REFERENCES 1
LPD10289H1L5Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 10289LUPH1L5?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 10289LUPH1L5?
10289LUPH1L5 is a SEAL,PLAIN.
What parts can replace 10289LUPH1L5?
There is 1 known substitute for 10289LUPH1L5: LPD10289H1L5. Substitute compatibility should be verified for your specific system.
What is the NSN for 10289LUPH1L5?
10289LUPH1L5 is cataloged in the U.S. Government catalog under NSN 5330-00-071-6646. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 10289LUPH1L5