PartsTable
Technical Data Sheet
Download PDF

102810 — GAGE,PRESSURE,DIAL INDICATING

✓ Government record, cited
— · MRO · MRO_GENERAL
PRODUCT OVERVIEW

102810: GAGE,PRESSURE,DIAL INDICATING.

The GAGE,PRESSURE,DIAL INDICATING is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, head_style: HEXAGON, design_form: PREBENT, head_height: 0.226 INCHES MINIMUM AND 0.243 INCHES MAXIMUM IN, thread_class: 3A A, overall_width: 5.280 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5305-00-716-4984, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 102810
NSN: 5305-00-716-4984
NIINs: 007164984, 011170441, 012894081, 014768875, 016600185
FSC: 5305 — Screws
CAGE: 15434 — CUMMINS INC. (USA)
SPECIFICATIONS
materialSTEEL OVERALL
head_styleHEXAGON
design_formPREBENT
head_height0.226 INCHES MINIMUM AND 0.243 INCHES MAXIMUM IN
thread_class3A A
overall_width5.280 INCHES NOMINAL IN
thread_length1.000 INCHES MINIMUM IN
overall_height3.250 INCHES NOMINAL IN
overall_length5.700 INCHES NOMINAL IN
fastener_length1.935 INCHES MINIMUM AND 2.000 INCHES MAXIMUM IN
special_featuresFIRST STAGE, VALVE, CYLINDER AND FILL ADAPTER
thread_directionRIGHT-HAND
NSN5305-00-716-4984
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: 102810 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
HEAD HEIGHT: 0.226 INCHES MINIMUM AND 0.243 INCHES MAXIMUM IN
•
FASTENER LENGTH: 1.935 INCHES MINIMUM AND 2.000 INCHES MAXIMUM IN
•
THREAD LENGTH: 1.000 INCHES MINIMUM IN
•
NOMINAL THREAD DIAMETER: 0.375 INCHES IN
•
HEAD STYLE: HEXAGON
•
THREAD DIRECTION: RIGHT-HAND
•
WIDTH BETWEEN FLATS: 0.551 INCHES MINIMUM AND 0.563 INCHES MAXIMUM IN
•
THREAD CLASS: 3A A
TECHNICAL CHARACTERISTICS
HEAD HEIGHT0.226 INCHES MINIMUM AND 0.243 INCHES MAXIMUM IN
FASTENER LENGTH1.935 INCHES MINIMUM AND 2.000 INCHES MAXIMUM IN
THREAD LENGTH1.000 INCHES MINIMUM IN
NOMINAL THREAD DIAMETER0.375 INCHES IN
HEAD STYLEHEXAGON
THREAD DIRECTIONRIGHT-HAND
WIDTH BETWEEN FLATS0.551 INCHES MINIMUM AND 0.563 INCHES MAXIMUM IN
THREAD CLASS3A A
THREAD QUANTITY PER INCH24
MATERIALSTEEL OVERALL
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 102810?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 102810?
102810 is a GAGE,PRESSURE,DIAL INDICATING. It is classified as a MRO (MRO_GENERAL).
What is the NSN for 102810?
102810 is cataloged in the U.S. Government catalog under NSN 5305-00-716-4984. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 102810

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.