PartsTable
Technical Data Sheet
PartsTable / MRO / 102755
102755 ✓ Verified by PartsTable
— · MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
Grade/class stamped on head determines strength Metric and imperial threads look similar — measure pitch
Verify thread pitch — metric != imperial
PRODUCT OVERVIEW

The TARGET REFLECTOR is a the manufacturer industrial component. Key specifications include material: ASBESTOS AND RUBBER SYNTHETIC OVERALL, head_style: FLAT COUNTERSUNK, thread_class: 3A A, head_diameter: 0.268 INCHES NOMINAL IN, thread_length: 0.362 INCHES MINIMUM IN, screw_material: STEEL. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5305-00-531-1830, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 102755
NSN: 5305-00-531-1830
FSC: 5305
CAGE: 70408 — AT AND T CORP (USA)
SPECIFICATIONS
materialASBESTOS AND RUBBER SYNTHETIC OVERALL
head_styleFLAT COUNTERSUNK
thread_class3A A
head_diameter0.268 INCHES NOMINAL IN
thread_length0.362 INCHES MINIMUM IN
screw_materialSTEEL
fastener_length0.438 INCHES NOMINAL IN
outside_diameter1.980 INCHES MINIMUM AND 2.000 INCHES MAXIMUM IN
style_designatorCIRCULAR
thread_directionRIGHT-HAND
aperture_diameter1.500 INCHES MINIMUM AND 1.520 INCHES MAXIMUM IN
countersink_angle82.0 DEGREES NOMINAL
NSN5305-00-531-1830
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: 102755 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
COUNTERSINK ANGLE: 82.0 DEGREES NOMINAL
•
SCREW MATERIAL: STEEL
•
THREAD QUANTITY PER INCH: 40
•
THREAD SERIES DESIGNATOR: UNF
•
FASTENER LENGTH: 0.438 INCHES NOMINAL IN
•
INTERNAL DRIVE STYLE: CROSS RECESS TYPE 1
•
NOMINAL THREAD DIAMETER: 0.138 INCHES IN
•
THREAD CLASS: 3A A
TECHNICAL CHARACTERISTICS (FLIS)
COUNTERSINK ANGLE82.0 DEGREES NOMINAL
SCREW MATERIALSTEEL
THREAD QUANTITY PER INCH40
THREAD SERIES DESIGNATORUNF
FASTENER LENGTH0.438 INCHES NOMINAL IN
INTERNAL DRIVE STYLECROSS RECESS TYPE 1
NOMINAL THREAD DIAMETER0.138 INCHES IN
THREAD CLASS3A A
THREAD LENGTH0.362 INCHES MINIMUM IN
SCREW SURFACE TREATMENTPASSIVATE
VERIFIED SUBSTITUTES & CROSS-REFERENCES 3
102755Interchangeable
interchangeable cross-reference
interchangeable
102755AInterchangeable
interchangeable cross-reference
interchangeable
2709Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 102755?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 102755?
102755 is a TARGET REFLECTOR. It is classified as a MRO (MRO_GENERAL).
What parts can replace 102755?
There are 3 known substitutes for 102755: 102755, 102755A, 2709. Substitute compatibility should be verified for your specific system.
Is 102755 still available?
102755 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 102755

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026