PartsTable
Technical Data Sheet
Download PDF

1027149 — BEARING,BALL,ANNULAR

✓ Government record, cited
3M · TAPERED BEARING
PRODUCT OVERVIEW

1027149: BEARING,BALL,ANNULAR.

The BEARING,BALL,ANNULAR is a 3M industrial component. Key specifications include material: STEEL CORROSION RESISTING FASTENER, head_style: KNURLED NO. 4, head_height: 0.188 INCHES NOMINAL IN, thread_class: 2A A, head_diameter: 0.312 INCHES NOMINAL IN, thread_length: 0.281 INCHES NOMINAL IN.

This part is cataloged in the U.S. Government catalog under NSN 3110-00-796-7257, indicating validated use in U.S. government and defense logistics supply chains.

Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
1027149
NSN: 3110-00-796-7257
NIINs: 007967257, 009839443
FSC: 3110 — Bearings, Antifriction, Unmounted
CAGE: 10001 — NAVAIR AND NAVSEA MANAGED ORIGINAL DESIGN ACTIVITY DWG NOT MATERIAL/PARTS SUPPLIER (USA)
SPECIFICATIONS
materialSTEEL CORROSION RESISTING FASTENER
head_styleKNURLED NO. 4
head_height0.188 INCHES NOMINAL IN
thread_class2A A
head_diameter0.312 INCHES NOMINAL IN
thread_length0.281 INCHES NOMINAL IN
fastener_length0.656 INCHES NOMINAL IN
special_featuresHEAD VERTICALLY KNURLED
thread_directionRIGHT-HAND
surface_treatmentPASSIVATE STAND-OFF
internal_drive_styleSLOT
nominal_thread_diameter0.138 INCHES IN
NSN3110-00-796-7257
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 1027149 · 3M ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
RETAINER FABRICATION METHOD: PRESSED
•
LUBRICATION MATERIAL: OIL
•
INTERNAL CLEARANCE: 0.0002 INCHES MINIMUM RADIAL AND 0.0005 INCHES MAXIMUM RADIAL IN
•
FLANGE OUTSIDE DIAMETER: 0.6900 INCHES NOMINAL IN
•
SURFACE FINISH: GROUND
•
SHIELD QUANTITY: 2
•
STYLE DESIGNATOR: NON-LOADING GROOVE, NON-SEPARABLE
TECHNICAL CHARACTERISTICS
RETAINER FABRICATION METHODPRESSED
LUBRICATION MATERIALOIL
INTERNAL CLEARANCE0.0002 INCHES MINIMUM RADIAL AND 0.0005 INCHES MAXIMUM RADIAL IN
FLANGE OUTSIDE DIAMETER0.6900 INCHES NOMINAL IN
SURFACE FINISHGROUND
SHIELD QUANTITY2
STYLE DESIGNATORNON-LOADING GROOVE, NON-SEPARABLE
OVERALL WIDTH0.1970 INCHES NOMINAL IN
BORE SHAPESTRAIGHT
LOAD DIRECTIONRADIAL
SUBSTITUTES & CROSS-REFERENCES 2
FS1KDD7Reference document
Same NSN cross-reference
Reference document — Secondary reference
309-0876-000Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy 1027149?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 1027149?
1027149 is a BEARING,BALL,ANNULAR manufactured by 3M.
What parts can replace 1027149?
There are 2 known substitutes for 1027149: FS1KDD7, 309-0876-000. Substitute compatibility should be verified for your specific system.
What is the NSN for 1027149?
1027149 is cataloged in the U.S. Government catalog under NSN 3110-00-796-7257. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 1027149