PartsTable
Technical Data Sheet
PartsTable / MRO / 102701
102701 ✓ Verified by PartsTable
— · MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

RESISTOR,FIXED,WIRE WOUND,INDUCT. Key specifications include material: STEEL CORROSION RESISTING, body_width: 1.145 INCHES MAXIMUM IN, body_height: 0.500 INCHES MAXIMUM IN, body_length: 1.145 INCHES MAXIMUM IN, usage_design: OUTDOOR, arrester_type: RESISTOR. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-133-3412, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 102701
NSN: 5330-00-133-3412
FSC: 5330
CAGE: 10138 — ASTRONAUTICS CORPORATION OF AMERICA (USA)
SPECIFICATIONS
materialSTEEL CORROSION RESISTING
body_width1.145 INCHES MAXIMUM IN
body_height0.500 INCHES MAXIMUM IN
body_length1.145 INCHES MAXIMUM IN
usage_designOUTDOOR
arrester_typeRESISTOR
body_materialGLASS
overall_width5.312 INCHES NOMINAL IN
terminal_typeKNIFE BLADE AND BANANA JACK
aperture_width4.352 INCHES MINIMUM AND 4.362 INCHES MAXIMUM IN
overall_height6.480 INCHES NOMINAL IN
overall_length15.430 INCHES NOMINAL IN
NSN5330-00-133-3412
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 102701 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL THICKNESS: 0.284 INCHES MINIMUM AND 0.294 INCHES MAXIMUM IN
•
APERTURE LENGTH: 4.107 INCHES MINIMUM AND 4.117 INCHES MAXIMUM IN
•
APERTURE WIDTH: 4.352 INCHES MINIMUM AND 4.362 INCHES MAXIMUM IN
•
BEARING SURFACE WIDTH: 0.284 INCHES MINIMUM AND 0.294 INCHES MAXIMUM IN
•
CROSS-SECTIONAL SHAPE STYLE: SOLID SINGLE OR COMPOSITION
•
MATERIAL: RUBBER SILICONE CLASS Q OVERALL
•
HARDNESS RATING: 40.0 SHORE DUROMETER A NOMINAL OVERALL
•
STYLE DESIGNATOR: MARINE SQUARE
TECHNICAL CHARACTERISTICS (FLIS)
CROSS-SECTIONAL THICKNESS0.284 INCHES MINIMUM AND 0.294 INCHES MAXIMUM IN
APERTURE LENGTH4.107 INCHES MINIMUM AND 4.117 INCHES MAXIMUM IN
APERTURE WIDTH4.352 INCHES MINIMUM AND 4.362 INCHES MAXIMUM IN
BEARING SURFACE WIDTH0.284 INCHES MINIMUM AND 0.294 INCHES MAXIMUM IN
CROSS-SECTIONAL SHAPE STYLESOLID SINGLE OR COMPOSITION
MATERIALRUBBER SILICONE CLASS Q OVERALL
HARDNESS RATING40.0 SHORE DUROMETER A NOMINAL OVERALL
STYLE DESIGNATORMARINE SQUARE
VERIFIED SUBSTITUTES & CROSS-REFERENCES 11
10270-1Interchangeable
interchangeable cross-reference
interchangeable
462672-1Interchangeable
interchangeable cross-reference
interchangeable
A3725Interchangeable
interchangeable cross-reference
interchangeable
AD1211Interchangeable
interchangeable cross-reference
interchangeable
1931-03Interchangeable
interchangeable cross-reference
interchangeable
10-2701-1Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 102701?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 102701?
102701 is a RESISTOR,FIXED,WIRE WOUND,INDUCT. It is classified as a MRO (MRO_GENERAL).
What parts can replace 102701?
There are 11 known substitutes for 102701: 10270-1, 462672-1, A3725 and 8 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 102701?
102701 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-133-3412. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 102701

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026