PartsTable
Technical Data Sheet
Download PDF

102665 — SANDBAG SET,CERVICAL,X-RAY

✓ Government record, cited
— · MRO · MRO_GENERAL
PRODUCT OVERVIEW

102665: SANDBAG SET,CERVICAL,X-RAY.

The SANDBAG SET,CERVICAL,X-RAY is a the manufacturer industrial component. Key specifications include material: ALUMINUM ALLOY 6061, overall_width: 1.34 INCHES NOMINAL IN, overall_length: 4.49 INCHES NOMINAL IN, first_leg_angle: 90.0 DEGREES NOMINAL, first_leg_style: SQUARE, first_leg_width: 0.682 INCHES MINIMUM AND 0.692 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-00-134-3367, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 102665
NSN: 5340-00-134-3367
NIINs: 001343367, 007243297, 008150418, 011816109, 014281513, 016926332
FSC: 5340 — Hardware, Commercial
CAGE: 10138 — ASTRONAUTICS CORPORATION OF AMERICA (USA)
SPECIFICATIONS
materialALUMINUM ALLOY 6061
overall_width1.34 INCHES NOMINAL IN
overall_length4.49 INCHES NOMINAL IN
first_leg_angle90.0 DEGREES NOMINAL
first_leg_styleSQUARE
first_leg_width0.682 INCHES MINIMUM AND 0.692 INCHES MAXIMUM IN
first_leg_length0.557 INCHES MINIMUM AND 0.567 INCHES MAXIMUM IN
second_leg_styleANGLE
special_featuresUP TO 4,000 YARD RANGE; 4 X TARGETING MODES; WITHIN 2 YARD ACCURACY; INCLUDES CARRYING CASE, LENS CLOTH, HEX WRENCH AND CR2 BATTERY
style_designatorANGLE
second_leg_length0.573 INCHES MINIMUM AND 0.583 INCHES MAXIMUM IN
first_leg_thickness0.050 INCHES MINIMUM AND 0.070 INCHES MAXIMUM IN
NSN5340-00-134-3367
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 102665 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH: 0.100 INCHES MINIMUM AND 0.120 INCHES MAXIMUM IN
•
FIRST LEG ANGLE: 90.0 DEGREES NOMINAL
•
SECOND LEG HOLE DIAMETER: 0.115 INCHES MINIMUM AND 0.125 INCHES MAXIMUM IN
•
SECOND LEG LENGTH: 0.573 INCHES MINIMUM AND 0.583 INCHES MAXIMUM IN
•
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH: 0.051 INCHES MINIMUM AND 0.071 INCHES MAXIMUM IN
•
STYLE DESIGNATOR: ANGLE
•
FIRST LEG STYLE: SQUARE
•
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-A-225/8,T6 FED SPEC SINGLE MATERIAL RESPONSE
TECHNICAL CHARACTERISTICS
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH0.100 INCHES MINIMUM AND 0.120 INCHES MAXIMUM IN
FIRST LEG ANGLE90.0 DEGREES NOMINAL
SECOND LEG HOLE DIAMETER0.115 INCHES MINIMUM AND 0.125 INCHES MAXIMUM IN
SECOND LEG LENGTH0.573 INCHES MINIMUM AND 0.583 INCHES MAXIMUM IN
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH0.051 INCHES MINIMUM AND 0.071 INCHES MAXIMUM IN
STYLE DESIGNATORANGLE
FIRST LEG STYLESQUARE
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-A-225/8,T6 FED SPEC SINGLE MATERIAL RESPONSE
SECOND LEG THICKNESS0.050 INCHES MINIMUM AND 0.070 INCHES MAXIMUM IN
FIRST LEG THICKNESS0.050 INCHES MINIMUM AND 0.070 INCHES MAXIMUM IN
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy 102665?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 102665?
102665 is a SANDBAG SET,CERVICAL,X-RAY. It is classified as a MRO (MRO_GENERAL).
What is the NSN for 102665?
102665 is cataloged in the U.S. Government catalog under NSN 5340-00-134-3367. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 102665

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.