PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 1025122
1025122 ✓ Verified by PartsTable
3M · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

The BEARING,BALL,AIRFRAME is a 3M industrial component. Key specifications include head_style: FILLISTER, head_height: 0.053 INCHES MINIMUM AND 0.062 INCHES MAXIMUM IN, thread_class: 2A A, head_diameter: 0.124 INCHES MINIMUM AND 0.140 INCHES MAXIMUM IN, thread_length: 1.089 INCHES MINIMUM AND 1.125 INCHES MAXIMUM IN, screw_material: STEEL CORROSION RESISTING. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-142-4281, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
1025122
NSN: 3110-00-142-4281
FSC: 3110
CAGE: 49956 — RAYTHEON COMPANY DIV CORP (USA)
SPECIFICATIONS
head_styleFILLISTER
head_height0.053 INCHES MINIMUM AND 0.062 INCHES MAXIMUM IN
thread_class2A A
head_diameter0.124 INCHES MINIMUM AND 0.140 INCHES MAXIMUM IN
thread_length1.089 INCHES MINIMUM AND 1.125 INCHES MAXIMUM IN
screw_materialSTEEL CORROSION RESISTING
fastener_length1.125 INCHES NOMINAL IN
thread_directionRIGHT-HAND
internal_drive_styleSLOT
nominal_thread_diameter0.086 INCHES IN
screw_surface_treatmentPASSIVATE
minimum_tensile_strength80000 POUNDS PER SQUARE INCH LBS
NSN3110-00-142-4281
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 1025122 · 3M ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION: MIL-G-3278 MIL SPEC SINGLE MATERIAL RESPONSE
•
INNER RING WIDTH: 0.2810 INCHES NOMINAL IN
•
SHIELD QUANTITY: 2
•
LOAD DIRECTION: RADIAL
•
OUTER RING WIDTH: 0.2190 INCHES NOMINAL IN
•
MATERIAL: STEEL CORROSION RESISTING OVERALL
•
OVERALL OUTSIDE DIAMETER: 0.7500 INCHES NOMINAL IN
•
BORE DIAMETER: 0.2500 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATIONMIL-G-3278 MIL SPEC SINGLE MATERIAL RESPONSE
INNER RING WIDTH0.2810 INCHES NOMINAL IN
SHIELD QUANTITY2
LOAD DIRECTIONRADIAL
OUTER RING WIDTH0.2190 INCHES NOMINAL IN
MATERIALSTEEL CORROSION RESISTING OVERALL
OVERALL OUTSIDE DIAMETER0.7500 INCHES NOMINAL IN
BORE DIAMETER0.2500 INCHES NOMINAL IN
STYLE DESIGNATORSINGLE ROW INNER RING EXTENDED BOTH SIDES
VERIFIED SUBSTITUTES & CROSS-REFERENCES 26
1374Interchangeable
interchangeable cross-reference
interchangeable
TR1179Interchangeable
interchangeable cross-reference
interchangeable
520869Interchangeable
interchangeable cross-reference
interchangeable
101-0316Interchangeable
interchangeable cross-reference
interchangeable
101C316Interchangeable
interchangeable cross-reference
interchangeable
1-2X4FIG137Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 1025122?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 1025122?
1025122 is a BEARING,BALL,AIRFRAME manufactured by 3M.
What parts can replace 1025122?
There are 26 known substitutes for 1025122: 1374, TR1179, 520869 and 23 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 1025122?
1025122 is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-142-4281. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 1025122

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026