PartsTable
Technical Data Sheet
Download PDF

10246161 — NUT,SLEEVE

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

10246161: NUT,SLEEVE.

The NUT,SLEEVE is a the manufacturer industrial component. Key specifications include material: STEEL COMP 303SE OVERALL, nut_length: 0.795 INCHES NOMINAL IN, nut_diameter: 0.625 INCHES NOMINAL IN, thread_class: 2A A, thread_series: UNEF, flange_diameter: 0.940 INCHES MINIMUM AND 0.950 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5310-00-040-7629, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
10246161
NSN: 5310-00-040-7629
FSC: 5310 — Nuts and Washers
CAGE: 18876 — US ARMY AVIATION AND MISSILE COMMAND (USA)
SPECIFICATIONS
materialSTEEL COMP 303SE OVERALL
nut_length0.795 INCHES NOMINAL IN
nut_diameter0.625 INCHES NOMINAL IN
thread_class2A A
thread_seriesUNEF
flange_diameter0.940 INCHES MINIMUM AND 0.950 INCHES MAXIMUM IN
flange_thickness0.260 INCHES NOMINAL IN
thread_directionRIGHT-HAND
nominal_thread_size0.625 INCHES IN
cross-sectional_shapeROUND W/WRENCH FLATS OVERALL
thread_quantity_per_inch24
flange_width_across_flats0.806 INCHES NOMINAL IN
NSN5310-00-040-7629
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 10246161 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
FLANGE DIAMETER: 0.940 INCHES MINIMUM AND 0.950 INCHES MAXIMUM IN
•
FLANGE WIDTH ACROSS FLATS: 0.806 INCHES NOMINAL IN
•
NUT LENGTH: 0.795 INCHES NOMINAL IN
•
FLANGE THICKNESS: 0.260 INCHES NOMINAL IN
•
THREAD SERIES: UNEF
•
MATERIAL DOCUMENT AND CLASSIFICATION: ASTMA582 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
•
THREAD DIRECTION: RIGHT-HAND
•
NOMINAL THREAD SIZE: 0.625 INCHES IN
TECHNICAL CHARACTERISTICS
FLANGE DIAMETER0.940 INCHES MINIMUM AND 0.950 INCHES MAXIMUM IN
FLANGE WIDTH ACROSS FLATS0.806 INCHES NOMINAL IN
NUT LENGTH0.795 INCHES NOMINAL IN
FLANGE THICKNESS0.260 INCHES NOMINAL IN
THREAD SERIESUNEF
MATERIAL DOCUMENT AND CLASSIFICATIONASTMA582 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
THREAD DIRECTIONRIGHT-HAND
NOMINAL THREAD SIZE0.625 INCHES IN
NUT DIAMETER0.625 INCHES NOMINAL IN
CROSS-SECTIONAL SHAPEROUND W/WRENCH FLATS OVERALL
OTHER ITEMS IN FSC 5310 — Nuts and Washers
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5310-00-000-0040 5310-00-000-0077 5310-00-000-0079 5310-00-000-1146 5310-00-000-3815 5310-00-000-4532 5310-00-000-4540
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 10246161?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 10246161?
10246161 is a NUT,SLEEVE.
What is the NSN for 10246161?
10246161 is cataloged in the U.S. Government catalog under NSN 5310-00-040-7629. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 10246161

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.