The CLAMP,BLOCK,SECTION is a the manufacturer industrial component. Key specifications include block_height: 1.0100 INCHES MINIMUM AND 1.0700 INCHES MAXIMUM IN, overall_width: 0.6250 INCHES NOMINAL IN, overall_length: 7.4900 INCHES MINIMUM AND 7.5500 INCHES MAXIMUM IN, special_features: THE ITEM IS MADE FROM PLASTIC EPOXY AND GLASS FIBER, style_designator: RECTANGULAR, mounting_facility: UNTHREADED HOLE(S). This part is cataloged in the U.S.
Government catalog under NSN 5340-00-104-8887, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.
Verify compatibility with your specific system configuration before ordering.
WHERE IT FITS
10231685
NSN:5340-00-104-8887 FSC:5340 — Hardware, Commercial CAGE:18876 — US ARMY AVIATION AND MISSILE COMMAND (USA)
SPECIFICATIONS
block_height
1.0100 INCHES MINIMUM AND 1.0700 INCHES MAXIMUM IN
overall_width
0.6250 INCHES NOMINAL IN
overall_length
7.4900 INCHES MINIMUM AND 7.5500 INCHES MAXIMUM IN
special_features
THE ITEM IS MADE FROM PLASTIC EPOXY AND GLASS FIBER
style_designator
RECTANGULAR
mounting_facility
UNTHREADED HOLE(S)
clamping_hole_quantity
6
mounting_hole_diameter
0.2570 INCHES MINIMUM AND 0.2640 INCHES MAXIMUM IN
mounting_hole_quantity
2
material_document_and_classification
MIL-P-18177 MIL SPEC SINGLE MATERIAL RESPONSE
distance_from_end_to_first_clamping_hole_center
0.5850 INCHES NOMINAL IN
distance_from_end_to_first_mounting_hole_center
1.2200 INCHES NOMINAL IN
NSN
5340-00-104-8887
COMPONENT DIAGRAM
KEY FEATURES
•
MOUNTING HOLE QUANTITY: 2
•
CLAMPING HOLE QUANTITY: 6
•
CENTER TO CENTER DISTANCE BETWEEN FIRST AND FOURTH CLAMPING HOLES: 3.8100 INCHES NOMINAL IN
•
DISTANCE FROM END TO FIRST CLAMPING HOLE CENTER: 0.5850 INCHES NOMINAL IN
•
BLOCK HEIGHT: 1.0100 INCHES MINIMUM AND 1.0700 INCHES MAXIMUM IN
•
STYLE DESIGNATOR: RECTANGULAR
•
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-P-18177 MIL SPEC SINGLE MATERIAL RESPONSE
•
MOUNTING HOLE DIAMETER: 0.2570 INCHES MINIMUM AND 0.2640 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
MOUNTING HOLE QUANTITY
2
CLAMPING HOLE QUANTITY
6
CENTER TO CENTER DISTANCE BETWEEN FIRST AND FOURTH CLAMPING HOLES
3.8100 INCHES NOMINAL IN
DISTANCE FROM END TO FIRST CLAMPING HOLE CENTER
0.5850 INCHES NOMINAL IN
BLOCK HEIGHT
1.0100 INCHES MINIMUM AND 1.0700 INCHES MAXIMUM IN
STYLE DESIGNATOR
RECTANGULAR
MATERIAL DOCUMENT AND CLASSIFICATION
MIL-P-18177 MIL SPEC SINGLE MATERIAL RESPONSE
MOUNTING HOLE DIAMETER
0.2570 INCHES MINIMUM AND 0.2640 INCHES MAXIMUM IN
OVERALL LENGTH
7.4900 INCHES MINIMUM AND 7.5500 INCHES MAXIMUM IN
CENTER TO CENTER DISTANCE BETWEEN FIRST AND THIRD MOUNTING HOLES
2.5400 INCHES NOMINAL IN
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 10231685?
10231685 is a CLAMP,BLOCK,SECTION.
What parts can replace 10231685?
There is 1 known substitute for 10231685: 1440001048887. Substitute compatibility should be verified for your specific system.
What is the NSN for 10231685?
10231685 is cataloged in the U.S. Government catalog under NSN 5340-00-104-8887. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.