PartsTable
Technical Data Sheet
10224922 ✓ Verified by PartsTable
· ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The STANDOFF,THREADED,SPACING is a the manufacturer industrial component. Key specifications include length: 1.120 INCHES NOMINAL IN, style_designator: INTERNALLY THREADED FULL LENGTH, width_across_flats: 0.250 INCHES NOMINAL IN, cross-sectional_shape: HEXAGON, left_counterbore_depth: 0.090 INCHES NOMINAL IN, right_counterbore_depth: 0.090 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-438-1689, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
10224922
NSN: 5340-00-438-1689
FSC: 5340
CAGE: 18876 — US ARMY AVIATION AND MISSILE COMMAND (USA)
SPECIFICATIONS
length1.120 INCHES NOMINAL IN
style_designatorINTERNALLY THREADED FULL LENGTH
width_across_flats0.250 INCHES NOMINAL IN
cross-sectional_shapeHEXAGON
left_counterbore_depth0.090 INCHES NOMINAL IN
right_counterbore_depth0.090 INCHES NOMINAL IN
left_counterbore_diameter0.126 INCHES MINIMUM AND 0.146 INCHES MAXIMUM IN
NSN5340-00-438-1689
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 10224922 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
LEFT COUNTERBORE DEPTH: 0.090 INCHES NOMINAL IN
STYLE DESIGNATOR: INTERNALLY THREADED FULL LENGTH
RIGHT COUNTERBORE DEPTH: 0.090 INCHES NOMINAL IN
LEFT COUNTERBORE DIAMETER: 0.126 INCHES MINIMUM AND 0.146 INCHES MAXIMUM IN
LENGTH: 1.120 INCHES NOMINAL IN
CROSS-SECTIONAL SHAPE: HEXAGON
WIDTH ACROSS FLATS: 0.250 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
LEFT COUNTERBORE DEPTH0.090 INCHES NOMINAL IN
STYLE DESIGNATORINTERNALLY THREADED FULL LENGTH
RIGHT COUNTERBORE DEPTH0.090 INCHES NOMINAL IN
LEFT COUNTERBORE DIAMETER0.126 INCHES MINIMUM AND 0.146 INCHES MAXIMUM IN
LENGTH1.120 INCHES NOMINAL IN
CROSS-SECTIONAL SHAPEHEXAGON
WIDTH ACROSS FLATS0.250 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 16
4332-027Upgraded Successor
successor cross-reference
successor
91624427Upgraded Successor
successor cross-reference
successor
12001-1Interchangeable
interchangeable cross-reference
interchangeable
12001Interchangeable
interchangeable cross-reference
interchangeable
12Z46PC7Interchangeable
interchangeable cross-reference
interchangeable
43B21150-60Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 10224922?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 10224922?
10224922 is a STANDOFF,THREADED,SPACING.
What parts can replace 10224922?
There are 16 known substitutes for 10224922: 4332-027, 91624427, 12001-1 and 13 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 10224922?
10224922 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-438-1689. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 10224922