PartsTable
Technical Data Sheet
Download PDF

102236 — SEAL,VERTICAL PRESS

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

102236: SEAL,VERTICAL PRESS.

The SEAL,VERTICAL PRESS is a the manufacturer industrial component. Key specifications include head_style: BINDING, head_height: 0.080 INCHES NOMINAL IN, thread_class: 2A A, head_diameter: 0.290 INCHES NOMINAL IN, thread_length: 0.563 INCHES MINIMUM AND 0.625 INCHES MAXIMUM IN, screw_material: PLASTIC POLYHEXAMETHYLENE AMIDE. This part is cataloged in the U.S.

Government catalog under NSN 5330-00-012-0645, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
102236
NSN: 5330-00-012-0645
NIINs: 000120645, 010750962, 016703001
FSC: 5330 — Packing and Gasket Materials
CAGE: 38200 — DRS TECHNOLOGIES CANADA LTD (CAN)
SPECIFICATIONS
head_styleBINDING
head_height0.080 INCHES NOMINAL IN
thread_class2A A
head_diameter0.290 INCHES NOMINAL IN
thread_length0.563 INCHES MINIMUM AND 0.625 INCHES MAXIMUM IN
screw_materialPLASTIC POLYHEXAMETHYLENE AMIDE
fastener_length0.625 INCHES NOMINAL IN
thread_directionRIGHT-HAND
internal_drive_styleSLOT
nominal_thread_diameter0.164 INCHES IN
thread_quantity_per_inch32
thread_series_designatorUNIFIED NATIONAL COARSE (UNC)
NSN5330-00-012-0645
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 102236 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL THICKNESS: 0.031 INCHES NOMINAL IN
•
INSIDE CORNER RADIUS: 0.190 INCHES NOMINAL IN
•
HARDNESS RATING: 35.0 SHORE DUROMETER A MINIMUM AND 45.0 SHORE DUROMETER A MAXIMUM OVERALL
•
STYLE DESIGNATOR: NON-CIRCULAR
•
MATERIAL DOCUMENT AND CLASSIFICATION: ASTM D2000 2BC415BE3L ASSN STD SINGLE MATERIAL RESPONSE OVERALL
•
CROSS-SECTIONAL SHAPE STYLE: SOLID SINGLE OR COMPOSITION
TECHNICAL CHARACTERISTICS
CROSS-SECTIONAL THICKNESS0.031 INCHES NOMINAL IN
INSIDE CORNER RADIUS0.190 INCHES NOMINAL IN
HARDNESS RATING35.0 SHORE DUROMETER A MINIMUM AND 45.0 SHORE DUROMETER A MAXIMUM OVERALL
STYLE DESIGNATORNON-CIRCULAR
MATERIAL DOCUMENT AND CLASSIFICATIONASTM D2000 2BC415BE3L ASSN STD SINGLE MATERIAL RESPONSE OVERALL
OVERALL LENGTH6.120 INCHES NOMINAL IN
CROSS-SECTIONAL SHAPE STYLESOLID SINGLE OR COMPOSITION
OVERALL WIDTH3.370 INCHES NOMINAL IN
APERTURE WIDTH2.250 INCHES NOMINAL IN
APERTURE LENGTH5.000 INCHES NOMINAL IN
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 102236?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 102236?
102236 is a SEAL,VERTICAL PRESS.
What is the NSN for 102236?
102236 is cataloged in the U.S. Government catalog under NSN 5330-00-012-0645. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 102236

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.