PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 1020Z2320
1020Z2320 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The GASKET is a the manufacturer industrial component. Key specifications include outside_diameter: 6.500 INCHES NOMINAL IN, aperture_diameter: 4.656 INCHES NOMINAL IN, bolt_circle_diameter: 5.500 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-01-013-7730, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
1020Z2320
NSN: 5330-01-013-7730
FSC: 5330
CAGE: D9182 — ZF INDUSTRIEANTRIEBE WITTEN GMBH (DEU)
SPECIFICATIONS
outside_diameter6.500 INCHES NOMINAL IN
aperture_diameter4.656 INCHES NOMINAL IN
bolt_hole_quantity7
bolt_circle_diameter5.500 INCHES NOMINAL IN
NSN5330-01-013-7730
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 1020Z2320 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
APERTURE DIAMETER: 4.656 INCHES NOMINAL IN
•
BOLT HOLE QUANTITY: 7
•
BOLT CIRCLE DIAMETER: 5.500 INCHES NOMINAL IN
•
OUTSIDE DIAMETER: 6.500 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
APERTURE DIAMETER4.656 INCHES NOMINAL IN
BOLT HOLE QUANTITY7
BOLT CIRCLE DIAMETER5.500 INCHES NOMINAL IN
OUTSIDE DIAMETER6.500 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 7
3076712ZInterchangeable
interchangeable cross-reference
interchangeable
650806Interchangeable
interchangeable cross-reference
interchangeable
53-720-1Interchangeable
interchangeable cross-reference
interchangeable
14311Interchangeable
interchangeable cross-reference
interchangeable
666062-609Interchangeable
interchangeable cross-reference
interchangeable
10670390-001Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 1020Z2320?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 1020Z2320?
1020Z2320 is a GASKET.
What parts can replace 1020Z2320?
There are 7 known substitutes for 1020Z2320: 3076712Z, 650806, 53-720-1 and 4 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 1020Z2320?
1020Z2320 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-01-013-7730. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 1020Z2320

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026