PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 102039
102039 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The HEAT GUN,ELECTRIC is a the manufacturer industrial component. Key specifications include overall_width: 4.800 INCHES NOMINAL IN, overall_height: 4.800 INCHES NOMINAL IN, overall_length: 6.400 INCHES NOMINAL IN, special_features: W/ APERTURE REFLECTOR ASSY AND STANDARD BOX CONTROL 1R-1759-MK2/A, frequency_in_hertz: 60.0, end_item_identification: W/S CODE JOINT STARS PROGRAM. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-292-1593, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
102039
NSN: 5330-00-292-1593
FSC: 5330
CAGE: 12793 — AQUA-CHEM INC CLEAVER-BROOKS DIV (USA)
SPECIFICATIONS
overall_width4.800 INCHES NOMINAL IN
overall_height4.800 INCHES NOMINAL IN
overall_length6.400 INCHES NOMINAL IN
special_featuresW/ APERTURE REFLECTOR ASSY AND STANDARD BOX CONTROL 1R-1759-MK2/A
frequency_in_hertz60.0
end_item_identificationW/S CODE JOINT STARS PROGRAM
NSN5330-00-292-1593
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 102039 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
ACCOMMODATED SHAFT DIAMETER: 2.250 INCHES NOMINAL IN
•
CASE STYLE: SQUARE
•
MATERIAL: STEEL CASE
•
HOUSING BORE DIAMETER: 3.350 INCHES NOMINAL IN
•
SEAL WIDTH: 0.438 INCHES MINIMUM AND 0.500 INCHES MAXIMUM IN
•
SEALING ELEMENT STYLE: ANGULAR
•
ACCOMMODATED SHAFT MAXIMUM RATED SPEED: 2000 FEET PER MINUTE FT
TECHNICAL CHARACTERISTICS (FLIS)
ACCOMMODATED SHAFT DIAMETER2.250 INCHES NOMINAL IN
CASE STYLESQUARE
MATERIALSTEEL CASE
HOUSING BORE DIAMETER3.350 INCHES NOMINAL IN
SEAL WIDTH0.438 INCHES MINIMUM AND 0.500 INCHES MAXIMUM IN
SEALING ELEMENT STYLEANGULAR
ACCOMMODATED SHAFT MAXIMUM RATED SPEED2000 FEET PER MINUTE FT
MATERIALLEATHER OR RUBBER SYNTHETIC SEALING ELEMENT
VERIFIED SUBSTITUTES & CROSS-REFERENCES 25
16P96Interchangeable
interchangeable cross-reference
interchangeable
900123-0036Interchangeable
interchangeable cross-reference
interchangeable
12522Interchangeable
interchangeable cross-reference
interchangeable
1497Interchangeable
interchangeable cross-reference
interchangeable
13889-13836Interchangeable
interchangeable cross-reference
interchangeable
FFB187TYPE751Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 102039?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 102039?
102039 is a HEAT GUN,ELECTRIC.
What parts can replace 102039?
There are 25 known substitutes for 102039: 16P96, 900123-0036, 12522 and 22 more. Substitute compatibility should be verified for your specific system.
Is 102039 still available?
102039 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 102039

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026