PartsTable
Technical Data Sheet
Download PDF

102017-239J — BEARING,SLEEVE

✓ Government record, cited
— · BALL BEARING
PRODUCT OVERVIEW

102017-239J: BEARING,SLEEVE.

The BEARING,SLEEVE is a the manufacturer industrial component. Key specifications include material: COPPER ALLOY OVERALL, corner_shape: SQUARE OUTSIDE RIGHT CORNER, flange_width: 0.1225 INCHES MINIMUM AND 0.1275 INCHES MAXIMUM IN, overall_length: 0.7450 INCHES MINIMUM AND 0.7550 INCHES MAXIMUM IN, style_designator: SOLID, EXTERNAL FLANGE ONE END, body_inside_diameter: 0.3760 INCHES MINIMUM AND 0.3770 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 3120-00-661-4275, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
102017-239J
NSN: 3120-00-661-4275
FSC: 3120 — Bearings, Plain, Unmounted
CAGE: 16387 — GROUND SUPPORT ENGINEERING INC (USA)
SPECIFICATIONS
materialCOPPER ALLOY OVERALL
corner_shapeSQUARE OUTSIDE RIGHT CORNER
flange_width0.1225 INCHES MINIMUM AND 0.1275 INCHES MAXIMUM IN
overall_length0.7450 INCHES MINIMUM AND 0.7550 INCHES MAXIMUM IN
style_designatorSOLID, EXTERNAL FLANGE ONE END
body_inside_diameter0.3760 INCHES MINIMUM AND 0.3770 INCHES MAXIMUM IN
body_outside_diameter0.6260 INCHES MINIMUM AND 0.6270 INCHES MAXIMUM IN
flange_outside_diameter0.8725 INCHES MINIMUM AND 0.8750 INCHES MAXIMUM IN
material_document_and_classificationMIL-B-5697,TY 1,COMP A MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
NSN3120-00-661-4275
COMPONENT DIAGRAM
BALL BEARING — SEAL TYPE DETERMINES MAINTENANCE OD: — · BORE: — · WIDTH: — SEAL: Open · PN: 102017-239J · OEM ⚠ VERIFY BEFORE ORDERING ABEC grade: higher = tighter tolerance = higher cost. ABEC-1 is standard, ABEC-7+ for precision spindles. Open, shielded (ZZ), and sealed (2RS) versions have different max RPM ratings ✓ BROKER TIP 2RS = sealed for life (no maintenance). ZZ = shielded, re-greaseable. Open = must lubricate on install. Common interchange: 6205-2RS = 6205-2RSR = 6205-DDU (same bearing, different suffix) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CORNER SHAPE: SQUARE INSIDE RIGHT CORNER
•
FLANGE OUTSIDE DIAMETER: 0.8725 INCHES MINIMUM AND 0.8750 INCHES MAXIMUM IN
•
BODY OUTSIDE DIAMETER: 0.6260 INCHES MINIMUM AND 0.6270 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
CORNER SHAPESQUARE INSIDE RIGHT CORNER
CORNER SHAPESQUARE OUTSIDE RIGHT CORNER
CORNER SHAPESQUARE OUTSIDE LEFT CORNER
CORNER SHAPESQUARE LEFT FLANGE OUTSIDE RIGHT CORNER
CORNER SHAPESQUARE INSIDE LEFT CORNER
CORNER SHAPEROUND LEFT FLANGE BODY CORNER
FLANGE OUTSIDE DIAMETER0.8725 INCHES MINIMUM AND 0.8750 INCHES MAXIMUM IN
BODY OUTSIDE DIAMETER0.6260 INCHES MINIMUM AND 0.6270 INCHES MAXIMUM IN
STYLE DESIGNATORSOLID, EXTERNAL FLANGE ONE END
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-B-5697,TY 1,COMP A MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
SUBSTITUTES & CROSS-REFERENCES 2
F644-1Reference document
Same NSN cross-reference
Reference document — Secondary reference
S3409Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 102017-239J?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 102017-239J?
102017-239J is a BEARING,SLEEVE.
What parts can replace 102017-239J?
There are 2 known substitutes for 102017-239J: F644-1, S3409. Substitute compatibility should be verified for your specific system.
What is the NSN for 102017-239J?
102017-239J is cataloged in the U.S. Government catalog under NSN 3120-00-661-4275. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 102017-239J