PartsTable
Technical Data Sheet
PartsTable / MRO / 102015
102015 ✓ Verified by PartsTable
— · MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The COIL,RADIO FREQUENCY is a the manufacturer industrial component. Key specifications include material: LEATHER OR RUBBER SYNTHETIC SEALING ELEMENT, body_width: 1.500 INCHES NOMINAL IN, case_style: SQUARE, seal_width: 0.469 INCHES MINIMUM AND 0.531 INCHES MAXIMUM IN, body_height: 2.000 INCHES NOMINAL IN, body_length: 0.875 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-227-9517, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 102015
NSN: 5330-00-227-9517
FSC: 5330
CAGE: 71313 — VIKING TECHNOLOGIES, LTD. (USA)
SPECIFICATIONS
materialLEATHER OR RUBBER SYNTHETIC SEALING ELEMENT
body_width1.500 INCHES NOMINAL IN
case_styleSQUARE
seal_width0.469 INCHES MINIMUM AND 0.531 INCHES MAXIMUM IN
body_height2.000 INCHES NOMINAL IN
body_length0.875 INCHES NOMINAL IN
hole_diameter0.141 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
turn_quantity78 SINGLE COMPONENT SINGLE WINDING
coil_form_typeHOLLOW SINGLE COMPONENT
inclosure_typeFULLY INCLOSED
quality_factor90 MINIMUM SINGLE COMPONENT SINGLE WINDING
mounting_methodTHREADED BUSHING SINGLE GROUP
NSN5330-00-227-9517
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 102015 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL SHAPE STYLE: SOLID SINGLE OR COMPOSITION
•
STYLE DESIGNATOR: CIRCULAR
•
HOLE DIAMETER: 0.141 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
•
CROSS-SECTIONAL THICKNESS: 0.062 INCHES NOMINAL IN
•
BOLT CIRCLE DIAMETER: 3.125 INCHES NOMINAL IN
•
MATERIAL: RUBBER OVERALL
•
APERTURE DIAMETER: 2.812 INCHES NOMINAL IN
•
OUTSIDE DIAMETER: 3.500 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
CROSS-SECTIONAL SHAPE STYLESOLID SINGLE OR COMPOSITION
STYLE DESIGNATORCIRCULAR
HOLE DIAMETER0.141 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
CROSS-SECTIONAL THICKNESS0.062 INCHES NOMINAL IN
BOLT CIRCLE DIAMETER3.125 INCHES NOMINAL IN
MATERIALRUBBER OVERALL
APERTURE DIAMETER2.812 INCHES NOMINAL IN
OUTSIDE DIAMETER3.500 INCHES NOMINAL IN
BOLT HOLE QUANTITY3
VERIFIED SUBSTITUTES & CROSS-REFERENCES 7
102015Interchangeable
interchangeable cross-reference
interchangeable
8136Interchangeable
interchangeable cross-reference
interchangeable
59586R91Interchangeable
interchangeable cross-reference
interchangeable
27925Interchangeable
interchangeable cross-reference
interchangeable
SMB333536Interchangeable
interchangeable cross-reference
interchangeable
SCB93386Interchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 102015?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 102015?
102015 is a COIL,RADIO FREQUENCY. It is classified as a MRO (MRO_GENERAL).
What parts can replace 102015?
There are 7 known substitutes for 102015: 102015, 8136, 59586R91 and 4 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 102015?
102015 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-227-9517. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 102015

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026