PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 10200-3HECVPC33
10200-3HECVPC33 ✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

The BEARING,ROLLER,TAPERED is a the manufacturer tape media or drive component used in enterprise backup, archival, and disaster recovery environments. Key specifications include material: STEEL OVERALL, cup_width: 0.9375 INCHES NOMINAL IN, cone_width: 1.2500 INCHES NOMINAL IN, bore_diameter: 1.8750 INCHES NOMINAL IN, overall_width: 1.3125 INCHES NOMINAL IN, standout_width: 0.3750 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-076-2388, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
10200-3HECVPC33
NSN: 3110-00-076-2388
FSC: 3110
CAGE: 70691 — CAPITOL GEARS INC
SPECIFICATIONS
materialSTEEL OVERALL
cup_width0.9375 INCHES NOMINAL IN
cone_width1.2500 INCHES NOMINAL IN
bore_diameter1.8750 INCHES NOMINAL IN
overall_width1.3125 INCHES NOMINAL IN
standout_width0.3750 INCHES NOMINAL IN
style_designatorSTRAIGHT BORE, STEEP ANGLE
cone_corner_radius0.1400 INCHES NOMINAL IN
backface_corner_radius0.1250 INCHES NOMINAL IN
overall_outside_diameter4.6250 INCHES NOMINAL IN
standard_tolerance_designationAFBMA CLASS 2
NSN3110-00-076-2388
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 10200-3HECVPC33 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CONE CORNER RADIUS: 0.1400 INCHES NOMINAL IN
•
STANDARD TOLERANCE DESIGNATION: AFBMA CLASS 2
•
BORE DIAMETER: 1.8750 INCHES NOMINAL IN
•
CONE WIDTH: 1.2500 INCHES NOMINAL IN
•
MATERIAL: STEEL OVERALL
•
BACKFACE CORNER RADIUS: 0.1250 INCHES NOMINAL IN
•
STYLE DESIGNATOR: STRAIGHT BORE, STEEP ANGLE
TYPICAL APPLICATIONS
  • Long-term data archival and compliance retention
  • Offsite backup and disaster recovery
  • Air-gapped ransomware protection
  • Cold storage tier for infrequently accessed data
TECHNICAL CHARACTERISTICS (FLIS)
CONE CORNER RADIUS0.1400 INCHES NOMINAL IN
STANDARD TOLERANCE DESIGNATIONAFBMA CLASS 2
BORE DIAMETER1.8750 INCHES NOMINAL IN
CONE WIDTH1.2500 INCHES NOMINAL IN
OVERALL WIDTH1.3125 INCHES NOMINAL IN
MATERIALSTEEL OVERALL
BACKFACE CORNER RADIUS0.1250 INCHES NOMINAL IN
STYLE DESIGNATORSTRAIGHT BORE, STEEP ANGLE
STANDOUT WIDTH0.3750 INCHES NOMINAL IN
CUP WIDTH0.9375 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 14
10234Interchangeable
interchangeable cross-reference
interchangeable
FFS103Interchangeable
interchangeable cross-reference
interchangeable
MS51028-48Interchangeable
interchangeable cross-reference
interchangeable
1023-LInterchangeable
interchangeable cross-reference
interchangeable
10234-1Interchangeable
interchangeable cross-reference
interchangeable
901E324P9Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 10200-3HECVPC33?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 10200-3HECVPC33?
10200-3HECVPC33 is a BEARING,ROLLER,TAPERED.
What parts can replace 10200-3HECVPC33?
There are 14 known substitutes for 10200-3HECVPC33: 10234, FFS103, MS51028-48 and 11 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 10200-3HECVPC33?
10200-3HECVPC33 is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-076-2388. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 10200-3HECVPC33

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026