PartsTable
Technical Data Sheet
Download PDF

1020-36435-13 — NUT,PLAIN,WING

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

1020-36435-13: NUT,PLAIN,WING.

The NUT,PLAIN,WING is a the manufacturer industrial component. Key specifications include material: COPPER ALLOY OVERALL, nut_style: WING, thread_class: 2B, body_diameter: 0.719 INCHES NOMINAL IN, thread_series: UNIFIED NATIONAL COARSE (UNC), overall_height: 0.688 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5310-00-732-6278, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
1020-36435-13
NSN: 5310-00-732-6278
FSC: 5310 — Nuts and Washers
CAGE: 14555 — ADVANCED INDUSTRIES, LLC (USA)
SPECIFICATIONS
materialCOPPER ALLOY OVERALL
nut_styleWING
thread_class2B
body_diameter0.719 INCHES NOMINAL IN
thread_seriesUNIFIED NATIONAL COARSE (UNC)
overall_height0.688 INCHES NOMINAL IN
thread_directionRIGHT-HAND
wing_spread_width2.562 INCHES NOMINAL IN
nominal_thread_size0.312 INCHES IN
thread_quantity_per_inch18
NSN5310-00-732-6278
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 1020-36435-13 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
BODY DIAMETER: 0.719 INCHES NOMINAL IN
•
THREAD SERIES: UNIFIED NATIONAL COARSE (UNC)
•
THREAD DIRECTION: RIGHT-HAND
•
NOMINAL THREAD SIZE: 0.312 INCHES IN
•
NUT STYLE: WING
•
THREAD CLASS: 2B
•
THREAD QUANTITY PER INCH: 18
TECHNICAL CHARACTERISTICS
BODY DIAMETER0.719 INCHES NOMINAL IN
OVERALL HEIGHT0.688 INCHES NOMINAL IN
THREAD SERIESUNIFIED NATIONAL COARSE (UNC)
THREAD DIRECTIONRIGHT-HAND
NOMINAL THREAD SIZE0.312 INCHES IN
NUT STYLEWING
THREAD CLASS2B
THREAD QUANTITY PER INCH18
MATERIALCOPPER ALLOY OVERALL
WING SPREAD WIDTH2.562 INCHES NOMINAL IN
SUBSTITUTES & CROSS-REFERENCES 1
5-14-364-35-13Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 1020-36435-13?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 1020-36435-13?
1020-36435-13 is a NUT,PLAIN,WING.
What parts can replace 1020-36435-13?
There is 1 known substitute for 1020-36435-13: 5-14-364-35-13. Substitute compatibility should be verified for your specific system.
What is the NSN for 1020-36435-13?
1020-36435-13 is cataloged in the U.S. Government catalog under NSN 5310-00-732-6278. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 1020-36435-13

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.