PartsTable
Technical Data Sheet
PartsTable / MRO / 102-893
102-893 ✓ Verified by PartsTable
— · MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

CONE AND ROLLERS,TAPERED ROLLER. Key specifications include special_features: 24.0 V DC,9.625 IN.LG,7.030 IN.W,2.875 IN.H V, fsc_application_data: MONITOR SET,TELEVISION. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-100-3700, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 102-893
NSN: 3110-00-100-3700
FSC: 3110
CAGE: 81795 — ALLIANZ SWEEPER COMPANY (USA)
SPECIFICATIONS
special_features24.0 V DC,9.625 IN.LG,7.030 IN.W,2.875 IN.H V
fsc_application_dataMONITOR SET,TELEVISION
NSN3110-00-100-3700
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 102-893 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
STANDARD TOLERANCE DESIGNATION: AFBMA CLASS 2
•
BORE DIAMETER: 1.0000 INCHES NOMINAL IN
•
CONE WIDTH: 0.5614 INCHES NOMINAL IN
•
CONE CORNER RADIUS: 0.0400 INCHES NOMINAL IN
•
STYLE DESIGNATOR: NORMAL ANGLE
•
MATERIAL: STEEL OVERALL
TYPICAL APPLICATIONS
  • Long-term data archival and compliance retention
  • Offsite backup and disaster recovery
  • Air-gapped ransomware protection
  • Cold storage tier for infrequently accessed data
TECHNICAL CHARACTERISTICS (FLIS)
STANDARD TOLERANCE DESIGNATIONAFBMA CLASS 2
BORE DIAMETER1.0000 INCHES NOMINAL IN
CONE WIDTH0.5614 INCHES NOMINAL IN
CONE CORNER RADIUS0.0400 INCHES NOMINAL IN
STYLE DESIGNATORNORMAL ANGLE
MATERIALSTEEL OVERALL
VERIFIED SUBSTITUTES & CROSS-REFERENCES 23
QQ-A-200/3Interchangeable
interchangeable cross-reference
interchangeable
AMS-QQ-A-200/3Interchangeable
interchangeable cross-reference
interchangeable
PA3171Interchangeable
interchangeable cross-reference
interchangeable
102-893Interchangeable
interchangeable cross-reference
interchangeable
MIL-DTL-25988/1Interchangeable
interchangeable cross-reference
interchangeable
PRP568-006-1903-70Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 102-893?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 102-893?
102-893 is a CONE AND ROLLERS,TAPERED ROLLER. It is classified as a MRO (MRO_GENERAL).
What parts can replace 102-893?
There are 23 known substitutes for 102-893: QQ-A-200/3, AMS-QQ-A-200/3, PA3171 and 20 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 102-893?
102-893 is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-100-3700. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 102-893

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026