PartsTable
Technical Data Sheet
PartsTable / MRO / 102-466-1
102-466-1 ✓ Verified by PartsTable
3M · MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

The RESISTOR NETWORK,FIXED,FILM is a 3M industrial component. Key specifications include diameter: 0.124 INCHES MINIMUM AND 0.125 INCHES MAXIMUM IN, material: STEEL COMP 416 OVERALL, body_width: 0.200 INCHES MINIMUM AND 0.220 INCHES MAXIMUM IN, body_height: 0.080 INCHES MAXIMUM IN, body_length: 0.200 INCHES NOMINAL IN, terminal_type: TERMINAL TYPE PER BODY STYLE. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5315-00-018-7565, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 102-466-1
NSN: 5315-00-018-7565
FSC: 5315
CAGE: 36452 — DRS TECHNOLOGIES CANADA LTD (CAN)
SPECIFICATIONS
diameter0.124 INCHES MINIMUM AND 0.125 INCHES MAXIMUM IN
materialSTEEL COMP 416 OVERALL
body_width0.200 INCHES MINIMUM AND 0.220 INCHES MAXIMUM IN
body_height0.080 INCHES MAXIMUM IN
body_length0.200 INCHES NOMINAL IN
terminal_typeTERMINAL TYPE PER BODY STYLE
overall_length0.760 INCHES MINIMUM AND 0.780 INCHES MAXIMUM IN
undercut_width0.018 INCHES MINIMUM AND 0.020 INCHES MAXIMUM IN
first_end_styleSQUARE
effective_length0.669 INCHES MINIMUM AND 0.679 INCHES MAXIMUM IN
inclosure_methodENCAPSULATED
special_featuresELECTROSTATIC DISCHARGE SENSITIVE DEVICE
NSN5315-00-018-7565
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 102-466-1 · 3M ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
DIAMETER: 0.124 INCHES MINIMUM AND 0.125 INCHES MAXIMUM IN
•
UNDERCUT DIAMETER: 0.104 INCHES MINIMUM AND 0.107 INCHES MAXIMUM IN
•
UNDERCUT WIDTH: 0.018 INCHES MINIMUM AND 0.020 INCHES MAXIMUM IN
•
SECOND END RELATIONSHIP WITH FIRST END: IDENTICAL
•
FIRST END LOCATION: BOTH ENDS
•
MATERIAL: STEEL COMP 416 OVERALL
•
EFFECTIVE LENGTH: 0.669 INCHES MINIMUM AND 0.679 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
DIAMETER0.124 INCHES MINIMUM AND 0.125 INCHES MAXIMUM IN
UNDERCUT DIAMETER0.104 INCHES MINIMUM AND 0.107 INCHES MAXIMUM IN
UNDERCUT WIDTH0.018 INCHES MINIMUM AND 0.020 INCHES MAXIMUM IN
SECOND END RELATIONSHIP WITH FIRST ENDIDENTICAL
FIRST END LOCATIONBOTH ENDS
MATERIALSTEEL COMP 416 OVERALL
EFFECTIVE LENGTH0.669 INCHES MINIMUM AND 0.679 INCHES MAXIMUM IN
OVERALL LENGTH0.760 INCHES MINIMUM AND 0.780 INCHES MAXIMUM IN
SECOND UNDERCUT WIDTH0.018 INCHES MINIMUM AND 0.020 INCHES MAXIMUM IN
SURFACE TREATMENTPASSIVATE OVERALL
VERIFIED SUBSTITUTES & CROSS-REFERENCES 1
G377643-1Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 102-466-1?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 102-466-1?
102-466-1 is a RESISTOR NETWORK,FIXED,FILM manufactured by 3M. It is classified as a MRO (MRO_GENERAL).
What parts can replace 102-466-1?
There is 1 known substitute for 102-466-1: G377643-1. Substitute compatibility should be verified for your specific system.
What is the NSN for 102-466-1?
102-466-1 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5315-00-018-7565. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 102-466-1

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026