PartsTable
Technical Data Sheet

101ENH4/S — CATCH,FLUSH

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

101ENH4/S: CATCH,FLUSH.

The CATCH,FLUSH is a the manufacturer industrial component. Key specifications include width: 1.000 INCHES NOMINAL IN, length: 2.760 INCHES NOMINAL IN, material: UNABLE TO DECODE, mounting_hole_diameter: 0.165 INCHES NOMINAL IN, end_item_identification: 5895-01-549-4234, part_name_assigned_by_controlling_agency: LATCH,TOGGLE. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-618-4811, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
101ENH4/S
NSN: 5340-01-618-4811
FSC: 5340 — Hardware, Commercial
CAGE: 0XY83 — JW WINCO INC (USA)
SPECIFICATIONS
width1.000 INCHES NOMINAL IN
length2.760 INCHES NOMINAL IN
materialUNABLE TO DECODE
mounting_hole_diameter0.165 INCHES NOMINAL IN
end_item_identification5895-01-549-4234
part_name_assigned_by_controlling_agencyLATCH,TOGGLE
center_to_center_distance_between_mounting_holes_along_width0.560 INCHES NOMINAL IN
center_to_center_distance_between_mounting_holes_along_length2.320 INCHES NOMINAL IN
NSN5340-01-618-4811
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 101ENH4/S MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
LENGTH: 2.760 INCHES NOMINAL IN
•
MOUNTING HOLE DIAMETER: 0.165 INCHES NOMINAL IN
•
CENTER TO CENTER DISTANCE BETWEEN MOUNTING HOLES ALONG WIDTH: 0.560 INCHES NOMINAL IN
•
CENTER TO CENTER DISTANCE BETWEEN MOUNTING HOLES ALONG LENGTH: 2.320 INCHES NOMINAL IN
•
WIDTH: 1.000 INCHES NOMINAL IN
•
MATERIAL: UNABLE TO DECODE
TECHNICAL CHARACTERISTICS
LENGTH2.760 INCHES NOMINAL IN
MOUNTING HOLE DIAMETER0.165 INCHES NOMINAL IN
CENTER TO CENTER DISTANCE BETWEEN MOUNTING HOLES ALONG WIDTH0.560 INCHES NOMINAL IN
CENTER TO CENTER DISTANCE BETWEEN MOUNTING HOLES ALONG LENGTH2.320 INCHES NOMINAL IN
WIDTH1.000 INCHES NOMINAL IN
PART NAME ASSIGNED BY CONTROLLING AGENCYLATCH,TOGGLE
END ITEM IDENTIFICATION5895-01-549-4234
MATERIALUNABLE TO DECODE
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES 1
06025Y0098Reference document
Same NSN cross-reference
Reference document — Vendor item drawing reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 101ENH4/S?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 101ENH4/S?
101ENH4/S is a CATCH,FLUSH.
What parts can replace 101ENH4/S?
There is 1 known substitute for 101ENH4/S: 06025Y0098. Substitute compatibility should be verified for your specific system.
What is the NSN for 101ENH4/S?
101ENH4/S is cataloged in the U.S. Government catalog under NSN 5340-01-618-4811. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 101ENH4/S

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.