PartsTable
Technical Data Sheet
Download PDF

101A365AT PIECE 1 — WASHER,SPLIT

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

101A365AT PIECE 1: WASHER,SPLIT.

The WASHER,SPLIT is a the manufacturer industrial component. Key specifications include material: COPPER ALLOY OVERALL, hole_diameter: 0.875 INCHES NOMINAL IN, outside_diameter: 1.836 INCHES NOMINAL IN, material_thickness: 0.248 INCHES NOMINAL IN, material_document_and_classification: B11G34A CAGEC 03502 MFR REF SINGLE MATERIAL RESPONSE OVERALL, part_name_assigned_by_controlling_agency: NAVY SPECIAL PROJECT. This part is cataloged in the U.S.

Government catalog under NSN 5310-01-372-3027, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
101A365AT PIECE 1
NSN: 5310-01-372-3027
FSC: 5310 — Nuts and Washers
CAGE: 03950 — NAVAL INVENTORY CONTROL POINT MECHANICSBURG (USA)
SPECIFICATIONS
materialCOPPER ALLOY OVERALL
hole_diameter0.875 INCHES NOMINAL IN
outside_diameter1.836 INCHES NOMINAL IN
material_thickness0.248 INCHES NOMINAL IN
material_document_and_classificationB11G34A CAGEC 03502 MFR REF SINGLE MATERIAL RESPONSE OVERALL
part_name_assigned_by_controlling_agencyNAVY SPECIAL PROJECT
NSN5310-01-372-3027
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 101A365AT PIECE 1 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL DOCUMENT AND CLASSIFICATION: B11G34A CAGEC 03502 MFR REF SINGLE MATERIAL RESPONSE OVERALL
•
OUTSIDE DIAMETER: 1.836 INCHES NOMINAL IN
•
MATERIAL THICKNESS: 0.248 INCHES NOMINAL IN
•
MATERIAL: COPPER ALLOY OVERALL
•
HOLE DIAMETER: 0.875 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
MATERIAL DOCUMENT AND CLASSIFICATIONB11G34A CAGEC 03502 MFR REF SINGLE MATERIAL RESPONSE OVERALL
OUTSIDE DIAMETER1.836 INCHES NOMINAL IN
MATERIAL THICKNESS0.248 INCHES NOMINAL IN
PART NAME ASSIGNED BY CONTROLLING AGENCYNAVY SPECIAL PROJECT
MATERIALCOPPER ALLOY OVERALL
HOLE DIAMETER0.875 INCHES NOMINAL IN
OTHER ITEMS IN FSC 5310 — Nuts and Washers
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5310-00-000-0040 5310-00-000-0077 5310-00-000-0079 5310-00-000-1146 5310-00-000-3815 5310-00-000-4532 5310-00-000-4540
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 101A365AT PIECE 1?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 101A365AT PIECE 1?
101A365AT PIECE 1 is a WASHER,SPLIT.
What is the NSN for 101A365AT PIECE 1?
101A365AT PIECE 1 is cataloged in the U.S. Government catalog under NSN 5310-01-372-3027. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 101A365AT PIECE 1

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.