PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 101A247ABP1
101A247ABP1 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The PACKING MATERIAL is a the manufacturer industrial component. Key specifications include fabrication_method: SOLID, cross-sectional_shape_style: CIRCULAR, nondefinitive_spec/std_data: B TYPE AND 1 CLASS, cross_section_outside_diameter: 0.188 INCHES NOMINAL IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-197-9651, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
101A247ABP1
NSN: 5330-00-197-9651
FSC: 5330
CAGE: 03502 — GENERAL ELECTRIC CO NAVAL AND DRIVE TURBINE SYSTEMS DEPT (USA)
SPECIFICATIONS
fabrication_methodSOLID
cross-sectional_shape_styleCIRCULAR
nondefinitive_spec/std_dataB TYPE AND 1 CLASS
cross_section_outside_diameter0.188 INCHES NOMINAL IN
NSN5330-00-197-9651
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 101A247ABP1 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
FABRICATION METHOD: SOLID
•
CROSS SECTION OUTSIDE DIAMETER: 0.188 INCHES NOMINAL IN
•
NONDEFINITIVE SPEC/STD DATA: B TYPE AND 1 CLASS
•
CROSS-SECTIONAL SHAPE STYLE: CIRCULAR
TECHNICAL CHARACTERISTICS (FLIS)
FABRICATION METHODSOLID
CROSS SECTION OUTSIDE DIAMETER0.188 INCHES NOMINAL IN
NONDEFINITIVE SPEC/STD DATAB TYPE AND 1 CLASS
CROSS-SECTIONAL SHAPE STYLECIRCULAR
NONDEFINITIVE SPEC/STD DATAB TYPE AND 1 CLASS
CROSS SECTION OUTSIDE DIAMETER0.188 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 14
MILP17303Interchangeable
interchangeable cross-reference
interchangeable
MIL-P-17303-1/8 IN THKInterchangeable
interchangeable cross-reference
interchangeable
187-1 1/8INInterchangeable
interchangeable cross-reference
interchangeable
5330PL1448691Interchangeable
interchangeable cross-reference
interchangeable
CA9189 PIECE 66FInterchangeable
interchangeable cross-reference
interchangeable
12965-27Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 101A247ABP1?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 101A247ABP1?
101A247ABP1 is a PACKING MATERIAL.
What parts can replace 101A247ABP1?
There are 14 known substitutes for 101A247ABP1: MILP17303, MIL-P-17303-1/8 IN THK, 187-1 1/8IN and 11 more. Substitute compatibility should be verified for your specific system.
Is 101A247ABP1 still available?
101A247ABP1 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 101A247ABP1

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026