PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 10195497-021
10195497-021 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The RING,WIPER is a the manufacturer industrial component. Key specifications include material: UNABLE TO DECODE, ring_style: CONCENTRIC, joint_style: DIAGONAL JOINT, inside_diameter: 2.000 INCHES NOMINAL IN, outside_diameter: 2.282 INCHES NOMINAL IN, material_thickness: 0.125 INCHES NOMINAL IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-118-1921, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
10195497-021
NSN: 5330-00-118-1921
FSC: 5330
CAGE: 18876 — US ARMY AVIATION AND MISSILE COMMAND (USA)
SPECIFICATIONS
materialUNABLE TO DECODE
ring_styleCONCENTRIC
joint_styleDIAGONAL JOINT
inside_diameter2.000 INCHES NOMINAL IN
outside_diameter2.282 INCHES NOMINAL IN
material_thickness0.125 INCHES NOMINAL IN
fsc_application_dataLAUNCHER,GUIDED MISSILE
outer_edge_thickness0.094 INCHES NOMINAL IN
cross-sectional_shape_styleOUTSIDE GROOVED, STRAIGHT FACE
NSN5330-00-118-1921
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 10195497-021 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
FSC APPLICATION DATA: LAUNCHER,GUIDED MISSILE
•
RING STYLE: CONCENTRIC
•
OUTER EDGE THICKNESS: 0.094 INCHES NOMINAL IN
•
MATERIAL: UNABLE TO DECODE
•
CROSS-SECTIONAL SHAPE STYLE: OUTSIDE GROOVED, STRAIGHT FACE
•
MATERIAL THICKNESS: 0.125 INCHES NOMINAL IN
•
OUTSIDE DIAMETER: 2.282 INCHES NOMINAL IN
•
INSIDE DIAMETER: 2.000 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
FSC APPLICATION DATALAUNCHER,GUIDED MISSILE
RING STYLECONCENTRIC
OUTER EDGE THICKNESS0.094 INCHES NOMINAL IN
MATERIALUNABLE TO DECODE
CROSS-SECTIONAL SHAPE STYLEOUTSIDE GROOVED, STRAIGHT FACE
MATERIAL THICKNESS0.125 INCHES NOMINAL IN
OUTSIDE DIAMETER2.282 INCHES NOMINAL IN
INSIDE DIAMETER2.000 INCHES NOMINAL IN
JOINT STYLEDIAGONAL JOINT
VERIFIED SUBSTITUTES & CROSS-REFERENCES 6
S11065-002-1Interchangeable
interchangeable cross-reference
interchangeable
11639261Interchangeable
interchangeable cross-reference
interchangeable
ST7M301-2Interchangeable
interchangeable cross-reference
interchangeable
S11065-21Interchangeable
Same NIIN cross-reference
interchangeable
S11065-21TInterchangeable
Same NIIN cross-reference
interchangeable
S2481-1Interchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 10195497-021?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 10195497-021?
10195497-021 is a RING,WIPER.
What parts can replace 10195497-021?
There are 6 known substitutes for 10195497-021: S11065-002-1, 11639261, ST7M301-2 and 3 more. Substitute compatibility should be verified for your specific system.
Is 10195497-021 still available?
10195497-021 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 10195497-021

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026