PartsTable
Technical Data Sheet
PartsTable / O-RING / 10193364
10193364 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The DIAL,CONTROL is a the manufacturer industrial component. Key specifications include height: 1.000 INCHES NOMINAL IN, drive_type: DIRECT, scale_type: LINEAR SINGLE SCALE, outside_diameter: 1.812 INCHES NOMINAL IN, style_designator: ROUND W/KNOB, attachment_method: SETSCREWS. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-00-180-9567, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
10193364
NSN: 5331-00-180-9567
FSC: 5331 — O-RING
CAGE: A486G — NIMIKKEISTOKESKUS NCB FINLAND (FIN)
SPECIFICATIONS
height1.000 INCHES NOMINAL IN
drive_typeDIRECT
scale_typeLINEAR SINGLE SCALE
outside_diameter1.812 INCHES NOMINAL IN
special_featuresADDITIONAL ATTACHMENT METHOD: SHAFT; COVER MATERIAL: ALUMINUM ALLOY; KNOB MATERIAL: PLASTIC: SCALE MATERIAL: ALUMINUM ALLOY
style_designatorROUND W/KNOB
attachment_methodSETSCREWS
nominal_thread_size0.112 INCHES SCREW HOLE IN
knob_portion_diameter1.000 INCHES NOMINAL IN
setscrew_hole_quantity1
scale_division_quantity100 SINGLE SCALE
thread_quantity_per_inch40 SCREW HOLE
NSN5331-00-180-9567
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 10193364 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL HEIGHT: 0.112 INCHES MINIMUM AND 0.120 INCHES MAXIMUM IN
•
MATERIAL: RUBBER SILICONE CLASS Q
•
ELONGATION PERCENTAGE: 125 MAXIMUM
•
TEMP RATING: -85.0 FAHRENHEIT AND 500.0 FAHRENHEIT DEGF
•
CENTER HOLE DIAMETER: 0.918 INCHES MINIMUM AND 0.930 INCHES MAXIMUM IN
•
OUTSIDE DIAMETER: 1.156 INCHES NOMINAL IN
•
HARDNESS RATING: 75.0 SHORE DUROMETER A NOMINAL
TECHNICAL CHARACTERISTICS (FLIS)
CROSS-SECTIONAL HEIGHT0.112 INCHES MINIMUM AND 0.120 INCHES MAXIMUM IN
MATERIALRUBBER SILICONE CLASS Q
ELONGATION PERCENTAGE125 MAXIMUM
TEMP RATING-85.0 FAHRENHEIT AND 500.0 FAHRENHEIT DEGF
CENTER HOLE DIAMETER0.918 INCHES MINIMUM AND 0.930 INCHES MAXIMUM IN
OUTSIDE DIAMETER1.156 INCHES NOMINAL IN
HARDNESS RATING75.0 SHORE DUROMETER A NOMINAL
VERIFIED SUBSTITUTES & CROSS-REFERENCES 26
MS9385-05Interchangeable
interchangeable cross-reference
interchangeable
MS9385-06ESInterchangeable
interchangeable cross-reference
interchangeable
MS9385-06Interchangeable
interchangeable cross-reference
interchangeable
MS9385-11Interchangeable
interchangeable cross-reference
interchangeable
S8990-579Interchangeable
interchangeable cross-reference
interchangeable
MS9385-03Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 10193364?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 10193364?
10193364 is a DIAL,CONTROL.
What parts can replace 10193364?
There are 26 known substitutes for 10193364: MS9385-05, MS9385-06ES, MS9385-06 and 23 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 10193364?
10193364 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-00-180-9567. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 10193364

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026