PartsTable
Technical Data Sheet
PartsTable / MRO / 101908
101908 ✓ Verified by PartsTable
Hama · MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
SAS cables have specific lane counts: 4i (internal) or 4e (external) Cable length matters — too short won't reach, too long creates clutter
Verify connector type on BOTH ends — many SAS cables are asymmetric
PRODUCT OVERVIEW

DISK ASSEMBLY,ACTUATOR,STATIONAR. Key specifications include material: STEEL, seat_angle: 37.0 DEGREES FIRST END, body_length: 0.150 INCHES NOMINAL IN, temp_rating: -40.0 FAHRENHEIT AND 200.0 FAHRENHEIT SINGLE RESPONSE DEGF, thread_class: 2B FIRST END, body_diameter: 0.070 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5998-01-017-1369, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 101908
NSN: 5998-01-017-1369
FSC: 5998 — CIRCUIT CARD ASSEMBLY
CAGE: 20284 — AIMTRON SYSTEMS, LLC (USA)
SPECIFICATIONS
materialSTEEL
seat_angle37.0 DEGREES FIRST END
body_length0.150 INCHES NOMINAL IN
temp_rating-40.0 FAHRENHEIT AND 200.0 FAHRENHEIT SINGLE RESPONSE DEGF
thread_class2B FIRST END
body_diameter0.070 INCHES NOMINAL IN
overall_width5.500 INCHES NOMINAL IN
terminal_typeWIRE LEAD
exterior_colorBLACK
inclosure_typeENCAPSULATED
overall_height0.750 INCHES MAXIMUM IN
overall_length5.485 INCHES MINIMUM AND 5.515 INCHES MAXIMUM IN
NSN5998-01-017-1369
COMPONENT DIAGRAM
CONN A SFF-8482 CONN B SFF-8087 LENGTH: SAS CABLE ASSEMBLY | SFF-8482 to SFF-8087 Cable length: | SAS | Shielded TITLE CABLE ASSY PN 101908 MFR Hama DISK ASSEMBLY,ACTUATOR,STATIONAR
TECHNICAL CHARACTERISTICS (FLIS)
OVERALL LENGTH5.485 INCHES MINIMUM AND 5.515 INCHES MAXIMUM IN
OVERALL WIDTH5.500 INCHES NOMINAL IN
SPECIAL FEATURESCAPACITOR 26,COIL 3,CONNECTOR 1,DIODE 9,MICROCIRCUIT 6,PRINTED WIRING BOARD 1,RESISTOR 39,TRANSISTOR 4
OVERALL HEIGHT0.750 INCHES MAXIMUM IN
OVERALL LENGTH5.485 INCHES MINIMUM AND 5.515 INCHES MAXIMUM IN
OVERALL WIDTH5.500 INCHES NOMINAL IN
SPECIAL FEATURESCAPACITOR 26,COIL 3,CONNECTOR 1,DIODE 9,MICROCIRCUIT 6,PRINTED WIRING BOARD 1,RESISTOR 39,TRANSISTOR 4
OVERALL HEIGHT0.750 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 7
476693000Interchangeable
interchangeable cross-reference
interchangeable
18083Interchangeable
interchangeable cross-reference
interchangeable
R350008-1Interchangeable
interchangeable cross-reference
interchangeable
7165X6Interchangeable
interchangeable cross-reference
interchangeable
MIL-F-18866Interchangeable
interchangeable cross-reference
interchangeable
101908Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99ESD SensitiveNot HAZMAT
Ready to buy 101908?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 101908?
101908 is a DISK ASSEMBLY,ACTUATOR,STATIONAR manufactured by Hama. It is classified as a MRO (MRO_GENERAL).
What parts can replace 101908?
There are 7 known substitutes for 101908: 476693000, 18083, R350008-1 and 4 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 101908?
101908 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5998-01-017-1369. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 101908

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026