PartsTable
Technical Data Sheet
Download PDF

10189629-1 — NUT,PLAIN,HEXAGON

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

10189629-1: NUT,PLAIN,HEXAGON.

The NUT,PLAIN,HEXAGON is a the manufacturer industrial component. Key specifications include nut_style: HEXAGON, nut_height: 0.100 INCHES MINIMUM AND 0.140 INCHES MAXIMUM IN, thread_class: 3B, thread_series: UNF, thread_direction: RIGHT-HAND, surface_treatment: PASSIVATE OVERALL. This part is cataloged in the U.S.

Government catalog under NSN 5310-00-485-9619, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
10189629-1
NSN: 5310-00-485-9619
FSC: 5310 — Nuts and Washers
CAGE: 18876 — US ARMY AVIATION AND MISSILE COMMAND (USA)
SPECIFICATIONS
nut_styleHEXAGON
nut_height0.100 INCHES MINIMUM AND 0.140 INCHES MAXIMUM IN
thread_class3B
thread_seriesUNF
thread_directionRIGHT-HAND
surface_treatmentPASSIVATE OVERALL
width_across_flats0.428 INCHES MINIMUM AND 0.440 INCHES MAXIMUM IN
nominal_thread_size0.250 INCHES IN
bearing_surface_typeCHAMFERED
thread_quantity_per_inch28
surface_treatment_document_and_classification171,FIN. 5.4.1 MIL STD SINGLE TREATMENT RESPONSE OVERALL
NSN5310-00-485-9619
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 10189629-1 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
WIDTH ACROSS FLATS: 0.428 INCHES MINIMUM AND 0.440 INCHES MAXIMUM IN
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: 171,FIN. 5.4.1 MIL STD SINGLE TREATMENT RESPONSE OVERALL
•
THREAD SERIES: UNF
•
THREAD DIRECTION: RIGHT-HAND
•
NOMINAL THREAD SIZE: 0.250 INCHES IN
•
NUT HEIGHT: 0.100 INCHES MINIMUM AND 0.140 INCHES MAXIMUM IN
•
SURFACE TREATMENT: PASSIVATE OVERALL
•
NUT STYLE: HEXAGON
TECHNICAL CHARACTERISTICS
WIDTH ACROSS FLATS0.428 INCHES MINIMUM AND 0.440 INCHES MAXIMUM IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION171,FIN. 5.4.1 MIL STD SINGLE TREATMENT RESPONSE OVERALL
THREAD SERIESUNF
THREAD DIRECTIONRIGHT-HAND
NOMINAL THREAD SIZE0.250 INCHES IN
NUT HEIGHT0.100 INCHES MINIMUM AND 0.140 INCHES MAXIMUM IN
SURFACE TREATMENTPASSIVATE OVERALL
NUT STYLEHEXAGON
THREAD CLASS3B
THREAD QUANTITY PER INCH28
OTHER ITEMS IN FSC 5310 — Nuts and Washers
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5310-00-000-0040 5310-00-000-0077 5310-00-000-0079 5310-00-000-1146 5310-00-000-3815 5310-00-000-4532 5310-00-000-4540
SUBSTITUTES & CROSS-REFERENCES 1
5310004859619Reference document
Same NSN cross-reference
Reference document — Informative reference only
LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy 10189629-1?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 10189629-1?
10189629-1 is a NUT,PLAIN,HEXAGON.
What parts can replace 10189629-1?
There is 1 known substitute for 10189629-1: 5310004859619. Substitute compatibility should be verified for your specific system.
What is the NSN for 10189629-1?
10189629-1 is cataloged in the U.S. Government catalog under NSN 5310-00-485-9619. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 10189629-1