PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 10187001
10187001 ✓ Verified by PartsTable
— · NUT WASHER
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

CONNECTOR,RECEPTACLE,ELECTRICAL. Key specifications include material: STEEL COMP 302 OVERALL, thickness: 0.016 INCHES NOMINAL IN, hole_diameter: 0.094 INCHES NOMINAL IN, overall_diameter: 0.156 INCHES NOMINAL IN, special_features: PART OF ENGINE COWLING, surface_treatment: PASSIVATE OVERALL. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-00-724-2537, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
10187001
NSN: 5310-00-724-2537
FSC: 5310
CAGE: 10138 — ASTRONAUTICS CORPORATION OF AMERICA (USA)
SPECIFICATIONS
materialSTEEL COMP 302 OVERALL
thickness0.016 INCHES NOMINAL IN
hole_diameter0.094 INCHES NOMINAL IN
overall_diameter0.156 INCHES NOMINAL IN
special_featuresPART OF ENGINE COWLING
surface_treatmentPASSIVATE OVERALL
peripheral_shape_styleROUND
center_hole_shape_styleROUND
end_item_identificationPA-18 PIPER CUB
cross-sectional_shape_styleRECTANGULAR
material_document_and_classificationMIL-S-5059,COMP G,COND A MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
NSN5310-00-724-2537
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 10187001 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
PERIPHERAL SHAPE STYLE: ROUND
•
HOLE DIAMETER: 0.094 INCHES NOMINAL IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-S-5059,COMP G,COND A MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
•
MATERIAL: STEEL COMP 302 OVERALL
•
SURFACE TREATMENT: PASSIVATE OVERALL
•
CENTER HOLE SHAPE STYLE: ROUND
•
OVERALL DIAMETER: 0.156 INCHES NOMINAL IN
•
THICKNESS: 0.016 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
PERIPHERAL SHAPE STYLEROUND
HOLE DIAMETER0.094 INCHES NOMINAL IN
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-S-5059,COMP G,COND A MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
MATERIALSTEEL COMP 302 OVERALL
SURFACE TREATMENTPASSIVATE OVERALL
CENTER HOLE SHAPE STYLEROUND
OVERALL DIAMETER0.156 INCHES NOMINAL IN
THICKNESS0.016 INCHES NOMINAL IN
CROSS-SECTIONAL SHAPE STYLERECTANGULAR
VERIFIED SUBSTITUTES & CROSS-REFERENCES 2
10187001Interchangeable
interchangeable cross-reference
interchangeable
101870Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 10187001?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 10187001?
10187001 is a CONNECTOR,RECEPTACLE,ELECTRICAL.
What parts can replace 10187001?
There are 2 known substitutes for 10187001: 10187001, 101870. Substitute compatibility should be verified for your specific system.
What is the NSN for 10187001?
10187001 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-00-724-2537. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 10187001

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026