10183646: CLAMP,LOOP.
The CLAMP,LOOP is a the manufacturer industrial component. Key specifications include material: STEEL CORROSION RESISTING NUT, overall_width: 0.615 INCHES MINIMUM AND 0.635 INCHES MAXIMUM IN, special_features: ATTACHMENT MOUNTING HOLE DIA IS 0.115 TO 0.119, style_designator: CLAMP & BRACKET, lug_hole_diameter: 0.194 INCHES MINIMUM AND 0.214 INCHES MAXIMUM IN, surface_treatment: PASSIVATE BAND. This part is cataloged in the U.S.
Government catalog under NSN 5340-01-250-8051, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.
Verify compatibility with your specific system configuration before ordering.
| material | STEEL CORROSION RESISTING NUT |
| overall_width | 0.615 INCHES MINIMUM AND 0.635 INCHES MAXIMUM IN |
| special_features | ATTACHMENT MOUNTING HOLE DIA IS 0.115 TO 0.119 |
| style_designator | CLAMP & BRACKET |
| lug_hole_diameter | 0.194 INCHES MINIMUM AND 0.214 INCHES MAXIMUM IN |
| surface_treatment | PASSIVATE BAND |
| material_thickness | 0.046 INCHES MINIMUM AND 0.054 INCHES MAXIMUM IN |
| loop_inside_diameter | 2.240 INCHES MINIMUM AND 2.260 INCHES MAXIMUM IN |
| material_document_and_classification | AMS-3209 ASSN STD SINGLE MATERIAL RESPONSE NUT |
| distance_from_loop_center_to_tongue_end | 2.050 INCHES MINIMUM AND 2.070 INCHES MAXIMUM IN |
| surface_treatment_document_and_classification | MIL-A-907 MIL SPEC SINGLE TREATMENT RESPONSE NUT |
| center_to_center_distance_between_first_and_second_holes | 1.240 INCHES MINIMUM AND 1.260 INCHES MAXIMUM IN |
| NSN | 5340-01-250-8051 |
| LUG HOLE DIAMETER | 0.194 INCHES MINIMUM AND 0.214 INCHES MAXIMUM IN |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-A-907 MIL SPEC SINGLE TREATMENT RESPONSE NUT |
| STYLE DESIGNATOR | CLAMP & BRACKET |
| MATERIAL DOCUMENT AND CLASSIFICATION | AMS-3209 ASSN STD SINGLE MATERIAL RESPONSE NUT |
| OVERALL WIDTH | 0.615 INCHES MINIMUM AND 0.635 INCHES MAXIMUM IN |
| MATERIAL THICKNESS | 0.046 INCHES MINIMUM AND 0.054 INCHES MAXIMUM IN |
| DISTANCE FROM LOOP CENTER TO TONGUE END | 2.050 INCHES MINIMUM AND 2.070 INCHES MAXIMUM IN |
| CENTER TO CENTER DISTANCE BETWEEN FIRST AND SECOND HOLES | 1.240 INCHES MINIMUM AND 1.260 INCHES MAXIMUM IN |
| SPECIAL FEATURES | ATTACHMENT MOUNTING HOLE DIA IS 0.115 TO 0.119 |
| SURFACE TREATMENT | PASSIVATE NUT |
No substitute or cross-reference records for this part.