Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW
The CLAMP,LOOP is a the manufacturer industrial component. Key specifications include material: STEEL CORROSION RESISTING ACTUATING ELEMENT, dial_size: 63MM DIA MM, scale_name: PRESSURE, scale_type: SINGLE, scale_range: +0.0 TO 30.0 POUNDS PRESSURE PER SQUARE INCH LBS, pointer_type: INDICATING. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-488-6553, indicating validated use in U.S.
government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.
WHERE IT FITS
1018341
NSN:5340-00-488-6553 FSC:5340 CAGE:80212 — BAE SYSTEMS LAND & ARMAMENTS L.P. (USA)
SPECIFICATIONS
material
STEEL CORROSION RESISTING ACTUATING ELEMENT
dial_size
63MM DIA MM
scale_name
PRESSURE
scale_type
SINGLE
scale_range
+0.0 TO 30.0 POUNDS PRESSURE PER SQUARE INCH LBS
pointer_type
INDICATING
adjustability
ADJUSTABLE
overall_depth
1.190 INCHES NOMINAL IN
pointer_color
BLACK
actuation_type
BOURDON TUBE
scale_accuracy
PORM 2 PCT FULL SCALE
connection_size
0.250 IN. NPT DIA IN
NSN
5340-00-488-6553
COMPONENT DIAGRAM
KEY FEATURES
•
STYLE DESIGNATOR: LEFT HAND CLAMP & BRACKET
•
MATERIAL: RUBBER CUSHION
•
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE: 0.734 INCHES NOMINAL IN
•
LUG WIDTH: 1.000 INCHES NOMINAL IN
•
DISTANCE FROM LOOP CENTER TO TONGUE END: 0.984 INCHES NOMINAL IN
•
TONGUE HOLE TYPE: ROUND, UNTHREADED
•
MATERIAL THICKNESS: 0.051 INCHES NOMINAL IN
•
LOOP INSIDE DIAMETER: 0.625 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
STYLE DESIGNATOR
LEFT HAND CLAMP & BRACKET
MATERIAL
RUBBER CUSHION
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE
0.734 INCHES NOMINAL IN
LUG WIDTH
1.000 INCHES NOMINAL IN
DISTANCE FROM LOOP CENTER TO TONGUE END
0.984 INCHES NOMINAL IN
TONGUE HOLE TYPE
ROUND, UNTHREADED
MATERIAL THICKNESS
0.051 INCHES NOMINAL IN
LOOP INSIDE DIAMETER
0.625 INCHES NOMINAL IN
LUG HOLE DIAMETER
0.199 INCHES NOMINAL IN
CENTER TO CENTER DISTANCE BETWEEN FIRST AND SECOND HOLES
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 1018341?
1018341 is a CLAMP,LOOP.
What parts can replace 1018341?
There are 10 known substitutes for 1018341: 20038, MDC1102A-10, MDC1102-10 and 7 more. Substitute compatibility should be verified for your specific system.
Is 1018341 still available?
1018341 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.