10181548: NUT STRIP.
The NUT STRIP is a the manufacturer industrial component. Key specifications include material: STEEL COMP 4130 OVERALL, nut_style: STRIP, nut_width: 0.820 INCHES NOMINAL IN, nut_length: 4.380 INCHES NOMINAL IN, thread_class: 2B, thread_series: UNF. This part is cataloged in the U.S.
Government catalog under NSN 5310-00-595-5247, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.
Verify compatibility with your specific system configuration before ordering.
| material | STEEL COMP 4130 OVERALL |
| nut_style | STRIP |
| nut_width | 0.820 INCHES NOMINAL IN |
| nut_length | 4.380 INCHES NOMINAL IN |
| thread_class | 2B |
| thread_series | UNF |
| thread_direction | RIGHT-HAND |
| aperture_quantity | 2 |
| surface_treatment | CADMIUM AND CHROMATE OVERALL |
| material_thickness | 0.500 INCHES NOMINAL IN |
| nominal_thread_size | 0.190 INCHES IN |
| thread_quantity_per_inch | 32 |
| NSN | 5310-00-595-5247 |
| NUT WIDTH | 0.820 INCHES NOMINAL IN |
| NUT LENGTH | 4.380 INCHES NOMINAL IN |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TYPE II,CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| THREAD SERIES | UNF |
| APERTURE QUANTITY | 2 |
| MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-6758 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL |
| MATERIAL THICKNESS | 0.500 INCHES NOMINAL IN |
| THREAD DIRECTION | RIGHT-HAND |
| NOMINAL THREAD SIZE | 0.190 INCHES IN |
| SPECIAL FEATURES | THE NUT STRIP HAS A SECOND SET OF HOLES CONSISTING OF TWO HOLES; THE SECOND SET OF HOLES HAVE A DIAMETER OF 3/8-24UNF-2B CUBORE FARSIDE WITH DIAMETER OF 0.390 THRU 0.430 INCHES BY A DEPTH OF 0.070 THRU 0.110 INCHES AND LOCATED 0.47 INCH FROM END TO BSC AND 0.38 INCH FROM BOTTOM OF PIECE TO BSC AND 3.430 TO 3.450 FROM BSC TO BSC OF SECOND SET HOLES; THE FIRST SET OF TWO HOLES ARE LOCATED 0.71 THRU 0.73 INCHES FROM BSC OF SECOND SET OF HOLES TO BSC OF FIRST SET OF HOLES,THE FIRST SET OF HOLES ARE LOCATED 0.38 INCHES FROM BOTTOM OF PIECE AND THE FIRST SET OF HOLES ARE 1.990 THRU 2.010 INCHES FROM BSC TO BSC APART IN |
No substitute or cross-reference records for this part.