PartsTable
Technical Data Sheet
101800 ✓ Verified by PartsTable
Hama · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

TANK,STORAGE,LIQUID ARGON-NITROG. Key specifications include material: STEEL CORROSION RESISTING OVERALL EXCEPT INSERT, body_width: 0.605 INCHES MINIMUM AND 0.615 INCHES MAXIMUM IN, body_height: 0.300 INCHES MAXIMUM IN, load_rating: 2000.0 GALLONS NOMINAL, inclosure_type: FULLY INCLOSED, overall_height: 0.350 INCHES MAXIMUM0.350 INCHES MAXIMUM IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-887-2150, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
101800
NSN: 5340-00-887-2150
FSC: 5340
CAGE: 71304 — CAPEWELL AERIAL SYSTEMS LLC (USA)
SPECIFICATIONS
materialSTEEL CORROSION RESISTING OVERALL EXCEPT INSERT
body_width0.605 INCHES MINIMUM AND 0.615 INCHES MAXIMUM IN
body_height0.300 INCHES MAXIMUM IN
load_rating2000.0 GALLONS NOMINAL
inclosure_typeFULLY INCLOSED
overall_height0.350 INCHES MAXIMUM0.350 INCHES MAXIMUM IN
overall_length0.605 INCHES MINIMUM AND 0.605 INCHES MINIMUM AND 0.615 INCHES MAXIMUM0.615 INCHES MAXIMUM IN
mounting_methodTERMINAL SINGLE GROUP
inductance_rating3.00 MILLIHENRIES NOMINAL SINGLE COMPONENT SINGLE PRIMARY
nominal_thread_size0.500 INCHES IN
reliability_indicatorNOT ESTABLISHEDNOT ESTABLISHED
maximum_operating_temp100.0 CELSIUS DEGC
NSN5340-00-887-2150
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 101800 MFR: Hama ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
MATERIAL: STEEL COMP 4140 OR STEEL COMP 8740 HOOK
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-S-5626 MIL SPEC SINGLE MATERIAL RESPONSE OR MIL-S-6049 MIL SPEC SINGLE MATERIAL RESPONSE HOOK
TECHNICAL CHARACTERISTICS (FLIS)
MATERIALSTEEL COMP 4140 OR STEEL COMP 8740 HOOK
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-S-5626 MIL SPEC SINGLE MATERIAL RESPONSE OR MIL-S-6049 MIL SPEC SINGLE MATERIAL RESPONSE HOOK
VERIFIED SUBSTITUTES & CROSS-REFERENCES 10
10-1800Upgraded Successor
successor cross-reference
successor
01-0900Upgraded Successor
successor cross-reference
successor
MIL-T-27892TMU-7A/EInterchangeable
interchangeable cross-reference
interchangeable
X1169-1Interchangeable
interchangeable cross-reference
interchangeable
DB101800Interchangeable
interchangeable cross-reference
interchangeable
206-020891Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability
RoHS CompliantEAR99Not HAZMAT
Ready to buy 101800?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 101800?
101800 is a TANK,STORAGE,LIQUID ARGON-NITROG manufactured by Hama.
What parts can replace 101800?
There are 10 known substitutes for 101800: 10-1800, 01-0900, MIL-T-27892TMU-7A/E and 7 more. Substitute compatibility should be verified for your specific system.
Is 101800 still available?
101800 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 101800