PartsTable
Technical Data Sheet
Download PDF

10175265 — CASTER,SWIVEL

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

10175265: CASTER,SWIVEL.

The CASTER,SWIVEL is a the manufacturer industrial component. Key specifications include material: IRON MALLEABLE BODY, stem_style: THREADED, wheel_type: SOLID, stem_length: 5.000 INCHES NOMINAL IN, wheel_diameter: 3.000 INCHES NOMINAL IN, effective_height: 4.000 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-307-8687, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
10175265
NSN: 5340-01-307-8687
FSC: 5340 — Hardware, Commercial
CAGE: 18876 — US ARMY AVIATION AND MISSILE COMMAND (USA)
SPECIFICATIONS
materialIRON MALLEABLE BODY
stem_styleTHREADED
wheel_typeSOLID
stem_length5.000 INCHES NOMINAL IN
wheel_diameter3.000 INCHES NOMINAL IN
wheel_quantity1
effective_height4.000 INCHES NOMINAL IN
style_designatorSWIVEL OFFSET
features_providedHEXAGON NUT
stem_socket_styleINTERNAL PIPE THREAD
surface_treatmentCADMIUM AND CHROMATE WHEEL RIM
wheel_bearing_typeROLLER
NSN5340-01-307-8687
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 10175265 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
STEM THREAD DIAMETER: 1.000 INCHES NOMINAL IN
•
STEM LENGTH: 5.000 INCHES NOMINAL IN
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416, TYPE 2, CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE WHEEL RIM
•
STEM THREAD QUANTITY PER INCH: 8
•
WHEEL TYPE: SOLID
•
STYLE DESIGNATOR: SWIVEL OFFSET
•
STEM STYLE: THREADED
•
WHEEL QUANTITY: 1
TECHNICAL CHARACTERISTICS
STEM THREAD DIAMETER1.000 INCHES NOMINAL IN
STEM LENGTH5.000 INCHES NOMINAL IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-416, TYPE 2, CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE WHEEL RIM
STEM THREAD QUANTITY PER INCH8
WHEEL TYPESOLID
STYLE DESIGNATORSWIVEL OFFSET
STEM STYLETHREADED
WHEEL QUANTITY1
FEATURES PROVIDEDHEXAGON NUT
STEM SOCKET STYLEINTERNAL PIPE THREAD
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES 1
M31015-MS-BM1-SP MODIFIEDReference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 10175265?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 10175265?
10175265 is a CASTER,SWIVEL.
What parts can replace 10175265?
There is 1 known substitute for 10175265: M31015-MS-BM1-SP MODIFIED. Substitute compatibility should be verified for your specific system.
What is the NSN for 10175265?
10175265 is cataloged in the U.S. Government catalog under NSN 5340-01-307-8687. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 10175265