PartsTable
Technical Data Sheet
10173033 ✓ Verified by PartsTable
· ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The O-RING is a the manufacturer industrial component. Key specifications include current_type: AC, terminal_type: PIN, overall_length: 2.500 INCHES NOMINAL IN, voltage_rating: 0.5 VOLTS MAXIMUM, overall_diameter: 0.5605 INCHES MINIMUM IN, mechanical_connection_size: UNEF 0.625-24 AND UNC 0.112-40. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-00-821-1759, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
10173033
NSN: 5331-00-821-1759
FSC: 5331 — O-RING
CAGE: 09647 — AQUA-CHEM, INC. (USA)
SPECIFICATIONS
current_typeAC
terminal_typePIN
overall_length2.500 INCHES NOMINAL IN
voltage_rating0.5 VOLTS MAXIMUM
overall_diameter0.5605 INCHES MINIMUM IN
terminal_quantity4
mechanical_connection_sizeUNEF 0.625-24 AND UNC 0.112-40
mechanical_connection_typeEXTERNAL THREAD
mechanical_connection_quantity2
NSN5331-00-821-1759
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 10173033 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
CENTER HOLE DIAMETER: 9.420 INCHES MINIMUM AND 9.530 INCHES MAXIMUM IN
CROSS-SECTIONAL HEIGHT: 0.269 INCHES MINIMUM AND 0.281 INCHES MAXIMUM IN
OUTSIDE DIAMETER: 9.958 INCHES MINIMUM AND 10.092 INCHES MAXIMUM IN
MATERIAL: RUBBER ISOBUTYLENE-ISOPRENE CLASS IIR
TECHNICAL CHARACTERISTICS (FLIS)
CENTER HOLE DIAMETER9.420 INCHES MINIMUM AND 9.530 INCHES MAXIMUM IN
CROSS-SECTIONAL HEIGHT0.269 INCHES MINIMUM AND 0.281 INCHES MAXIMUM IN
OUTSIDE DIAMETER9.958 INCHES MINIMUM AND 10.092 INCHES MAXIMUM IN
MATERIALRUBBER ISOBUTYLENE-ISOPRENE CLASS IIR
VERIFIED SUBSTITUTES & CROSS-REFERENCES 4
184914Interchangeable
interchangeable cross-reference
interchangeable
10173033Interchangeable
interchangeable cross-reference
interchangeable
15620Interchangeable
interchangeable cross-reference
interchangeable
5-27926PC33Interchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 10173033?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 10173033?
10173033 is a O-RING.
What parts can replace 10173033?
There are 4 known substitutes for 10173033: 184914, 10173033, 15620 and 1 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 10173033?
10173033 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-00-821-1759. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 10173033