PartsTable
Technical Data Sheet
10172775 ✓ Verified by PartsTable
· ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The O-RING is a the manufacturer industrial component. Key specifications include material: RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR, hardness_rating: 70.0 SHORE DUROMETER A NOMINAL, outside_diameter: 0.754 INCHES NOMINAL IN, center_hole_diameter: 0.609 INCHES MINIMUM AND 0.619 INCHES MAXIMUM IN, elongation_percentage: 250 MAXIMUM, cross-sectional_height: 0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-00-800-5182, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
10172775
NSN: 5331-00-800-5182
FSC: 5331 — O-RING
CAGE: A486G — NIMIKKEISTOKESKUS NCB FINLAND (FIN)
SPECIFICATIONS
materialRUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
hardness_rating70.0 SHORE DUROMETER A NOMINAL
outside_diameter0.754 INCHES NOMINAL IN
center_hole_diameter0.609 INCHES MINIMUM AND 0.619 INCHES MAXIMUM IN
elongation_percentage250 MAXIMUM
cross-sectional_height0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN
NSN5331-00-800-5182
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 10172775 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
CENTER HOLE DIAMETER: 0.609 INCHES MINIMUM AND 0.619 INCHES MAXIMUM IN
OUTSIDE DIAMETER: 0.754 INCHES NOMINAL IN
MATERIAL: RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
HARDNESS RATING: 70.0 SHORE DUROMETER A NOMINAL
ELONGATION PERCENTAGE: 250 MAXIMUM
CROSS-SECTIONAL HEIGHT: 0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
CENTER HOLE DIAMETER0.609 INCHES MINIMUM AND 0.619 INCHES MAXIMUM IN
OUTSIDE DIAMETER0.754 INCHES NOMINAL IN
MATERIALRUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
HARDNESS RATING70.0 SHORE DUROMETER A NOMINAL
ELONGATION PERCENTAGE250 MAXIMUM
CROSS-SECTIONAL HEIGHT0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 19
SAE-AS29561Interchangeable
interchangeable cross-reference
interchangeable
MS29561-265Interchangeable
interchangeable cross-reference
interchangeable
AS29561Interchangeable
interchangeable cross-reference
interchangeable
MS29561-123Interchangeable
interchangeable cross-reference
interchangeable
MS29561-347Interchangeable
interchangeable cross-reference
interchangeable
MS29561-262Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability
RoHS CompliantEAR99Not HAZMAT
Ready to buy 10172775?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 10172775?
10172775 is a O-RING.
What parts can replace 10172775?
There are 19 known substitutes for 10172775: SAE-AS29561, MS29561-265, AS29561 and 16 more. Substitute compatibility should be verified for your specific system.
Is 10172775 still available?
10172775 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 10172775