PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 101715-31L
101715-31L ✓ Verified by PartsTable
— · NUT WASHER
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

The WASHER,FLAT is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, thickness: 0.022 INCHES MINIMUM AND 0.042 INCHES MAXIMUM IN, hole_diameter: 0.318 INCHES MINIMUM AND 0.338 INCHES MAXIMUM IN, overall_diameter: 0.557 INCHES MINIMUM AND 0.582 INCHES MAXIMUM IN, surface_treatment: CADMIUM OVERALL, peripheral_shape_style: ROUND. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-00-167-0836, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
101715-31L
NSN: 5310-00-167-0836
FSC: 5310
CAGE: 08118 — EATON AVIATION CORPORATION (USA)
SPECIFICATIONS
materialSTEEL OVERALL
thickness0.022 INCHES MINIMUM AND 0.042 INCHES MAXIMUM IN
hole_diameter0.318 INCHES MINIMUM AND 0.338 INCHES MAXIMUM IN
overall_diameter0.557 INCHES MINIMUM AND 0.582 INCHES MAXIMUM IN
surface_treatmentCADMIUM OVERALL
peripheral_shape_styleROUND
center_hole_shape_styleROUND
cross-sectional_shape_styleRECTANGULAR
nondefinitive_spec/std_dataA TYPE AND 2 GRADE AND A CLASS
material_document_and_classificationMIL-S-7952 MIL SPEC SINGLE MATERIAL RESPONSE OR QQ-S-698 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
surface_treatment_document_and_classificationQQ-P-416,TY 2,CL 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
NSN5310-00-167-0836
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 101715-31L · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CENTER HOLE SHAPE STYLE: ROUND
•
OVERALL DIAMETER: 0.557 INCHES MINIMUM AND 0.582 INCHES MAXIMUM IN
•
SURFACE TREATMENT: CADMIUM OVERALL
•
MATERIAL: STEEL OVERALL
•
NONDEFINITIVE SPEC/STD DATA: A TYPE AND 2 GRADE AND A CLASS
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TY 2,CL 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
•
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-S-7952 MIL SPEC SINGLE MATERIAL RESPONSE OR QQ-S-698 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
•
HOLE DIAMETER: 0.318 INCHES MINIMUM AND 0.338 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
CENTER HOLE SHAPE STYLEROUND
OVERALL DIAMETER0.557 INCHES MINIMUM AND 0.582 INCHES MAXIMUM IN
SURFACE TREATMENTCADMIUM OVERALL
MATERIALSTEEL OVERALL
NONDEFINITIVE SPEC/STD DATAA TYPE AND 2 GRADE AND A CLASS
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-416,TY 2,CL 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-S-7952 MIL SPEC SINGLE MATERIAL RESPONSE OR QQ-S-698 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
HOLE DIAMETER0.318 INCHES MINIMUM AND 0.338 INCHES MAXIMUM IN
THICKNESS0.022 INCHES MINIMUM AND 0.042 INCHES MAXIMUM IN
CROSS-SECTIONAL SHAPE STYLERECTANGULAR
VERIFIED SUBSTITUTES & CROSS-REFERENCES 17
110 1-5/8Interchangeable
interchangeable cross-reference
interchangeable
2410 1-5/8Interchangeable
interchangeable cross-reference
interchangeable
200 1-5/8Interchangeable
interchangeable cross-reference
interchangeable
2410158Interchangeable
interchangeable cross-reference
interchangeable
911246Interchangeable
interchangeable cross-reference
interchangeable
304417Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 101715-31L?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 101715-31L?
101715-31L is a WASHER,FLAT.
What parts can replace 101715-31L?
There are 17 known substitutes for 101715-31L: 110 1-5/8, 2410 1-5/8, 200 1-5/8 and 14 more. Substitute compatibility should be verified for your specific system.
Is 101715-31L still available?
101715-31L is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 101715-31L

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026