PartsTable
Technical Data Sheet
Download PDF

1016820051 — CLEVIS,ROD END

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

1016820051: CLEVIS,ROD END.

The CLEVIS,ROD END is a the manufacturer industrial component. Key specifications include material: COPPER ALLOY OVERALL, end_radius: 0.344 INCHES NOMINAL IN, fork_depth: 0.844 INCHES NOMINAL IN, thread_class: 2B ROD CONNECTION, hole_diameter: 0.257 INCHES NOMINAL IN, overall_width: 0.688 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-079-5764, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
1016820051
NSN: 5340-01-079-5764
FSC: 5340 — Hardware, Commercial
CAGE: 19190 — GARD INC (USA)
SPECIFICATIONS
materialCOPPER ALLOY OVERALL
end_radius0.344 INCHES NOMINAL IN
fork_depth0.844 INCHES NOMINAL IN
thread_class2B ROD CONNECTION
hole_diameter0.257 INCHES NOMINAL IN
overall_width0.688 INCHES NOMINAL IN
overall_height0.688 INCHES NOMINAL IN
fork_span_width0.312 INCHES NOMINAL IN
special_featuresROD END HOLE ON SIDE OF CLEVIS AND IN LINE WITH FORK OPENING
style_designatorCLEVIS
thread_directionRIGHT-HAND ROD CONNECTION
surface_treatmentZINC OVERALL
NSN5340-01-079-5764
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 1016820051 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
FORK SPAN WIDTH: 0.312 INCHES NOMINAL IN
•
FORK ARM THICKNESS: 0.188 INCHES NOMINAL IN
•
END RADIUS: 0.344 INCHES NOMINAL IN
•
STYLE DESIGNATOR: CLEVIS
•
THREAD DIRECTION: RIGHT-HAND ROD CONNECTION
•
NOMINAL THREAD SIZE: 0.312 INCHES ROD CONNECTION IN
TECHNICAL CHARACTERISTICS
OVERALL HEIGHT0.688 INCHES NOMINAL IN
FORK SPAN WIDTH0.312 INCHES NOMINAL IN
FORK ARM THICKNESS0.188 INCHES NOMINAL IN
END RADIUS0.344 INCHES NOMINAL IN
STYLE DESIGNATORCLEVIS
OVERALL WIDTH0.688 INCHES NOMINAL IN
THREAD DIRECTIONRIGHT-HAND ROD CONNECTION
NOMINAL THREAD SIZE0.312 INCHES ROD CONNECTION IN
SPECIAL FEATURESROD END HOLE ON SIDE OF CLEVIS AND IN LINE WITH FORK OPENING
SURFACE TREATMENTZINC OVERALL
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES 1
10168200251Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 1016820051?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 1016820051?
1016820051 is a CLEVIS,ROD END.
What parts can replace 1016820051?
There is 1 known substitute for 1016820051: 10168200251. Substitute compatibility should be verified for your specific system.
What is the NSN for 1016820051?
1016820051 is cataloged in the U.S. Government catalog under NSN 5340-01-079-5764. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 1016820051

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.