PartsTable
Technical Data Sheet
Download PDF

10164299-3 — RETAINER,NUT AND BOLT

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

10164299-3: RETAINER,NUT AND BOLT.

The RETAINER,NUT AND BOLT is a the manufacturer industrial component. Key specifications include material: ALUMINUM ALLOY 2024, overall_width: 0.641 INCHES NOMINAL IN, overall_height: 0.286 INCHES MAXIMUM IN, overall_length: 1.301 INCHES MAXIMUM IN, style_designator: ANCHOR, surface_treatment: ANODIZE. This part is cataloged in the U.S.

Government catalog under NSN 5340-00-766-9859, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
10164299-3
NSN: 5340-00-766-9859
FSC: 5340 — Hardware, Commercial
CAGE: 18876 — US ARMY AVIATION AND MISSILE COMMAND (USA)
SPECIFICATIONS
materialALUMINUM ALLOY 2024
overall_width0.641 INCHES NOMINAL IN
overall_height0.286 INCHES MAXIMUM IN
overall_length1.301 INCHES MAXIMUM IN
style_designatorANCHOR
surface_treatmentANODIZE
material_thickness0.045 INCHES MAXIMUM IN
mounting_hole_diameter0.130 INCHES MINIMUM AND 0.135 INCHES MAXIMUM IN
width_between_cup_flats0.540 INCHES NOMINAL IN
material_document_and_classificationQQ-A-250/5, ALLOY 2024, T4 FED SPEC SINGLE MATERIAL RESPONSE
distance_between_mounting_hole_centers0.998 INCHES MINIMUM AND 1.002 INCHES MAXIMUM IN
surface_treatment_document_and_classificationMIL-A-8625, TYPE 2 MIL SPEC 1ST TREATMENT RESPONSE AND MIL-A-8625, TYPE 1 MIL SPEC 2ND TREATMENT RESPONSE
NSN5340-00-766-9859
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 10164299-3 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: MIL-A-8625, TYPE 2 MIL SPEC 1ST TREATMENT RESPONSE AND MIL-A-8625, TYPE 1 MIL SPEC 2ND TREATMENT RESPONSE
•
DISTANCE BETWEEN MOUNTING HOLE CENTERS: 0.998 INCHES MINIMUM AND 1.002 INCHES MAXIMUM IN
•
STYLE DESIGNATOR: ANCHOR
•
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-A-250/5, ALLOY 2024, T4 FED SPEC SINGLE MATERIAL RESPONSE
•
MOUNTING HOLE DIAMETER: 0.130 INCHES MINIMUM AND 0.135 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
OVERALL HEIGHT0.286 INCHES MAXIMUM IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONMIL-A-8625, TYPE 2 MIL SPEC 1ST TREATMENT RESPONSE AND MIL-A-8625, TYPE 1 MIL SPEC 2ND TREATMENT RESPONSE
DISTANCE BETWEEN MOUNTING HOLE CENTERS0.998 INCHES MINIMUM AND 1.002 INCHES MAXIMUM IN
STYLE DESIGNATORANCHOR
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-A-250/5, ALLOY 2024, T4 FED SPEC SINGLE MATERIAL RESPONSE
MOUNTING HOLE DIAMETER0.130 INCHES MINIMUM AND 0.135 INCHES MAXIMUM IN
OVERALL LENGTH1.301 INCHES MAXIMUM IN
OVERALL WIDTH0.641 INCHES NOMINAL IN
MATERIAL THICKNESS0.045 INCHES MAXIMUM IN
CENTER TO CENTER DISTANCE BETWEEN CUP AND MOUNTING HOLE0.500 INCHES NOMINAL IN
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy 10164299-3?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 10164299-3?
10164299-3 is a RETAINER,NUT AND BOLT.
What is the NSN for 10164299-3?
10164299-3 is cataloged in the U.S. Government catalog under NSN 5340-00-766-9859. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 10164299-3

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.