PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 10163307
10163307 ✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

The BEARING,BALL,ANNULAR is a the manufacturer industrial component. Key specifications include material: RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR, hardness_rating: 65.0 SHORE DUROMETER A NOMINAL, outside_diameter: 1.679 INCHES MINIMUM AND 1.719 INCHES MAXIMUM IN, center_hole_diameter: 1.415 INCHES MINIMUM AND 1.427 INCHES MAXIMUM IN, cross-sectional_height: 0.135 INCHES MINIMUM AND 0.143 INCHES MAXIMUM IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-205-3722, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
10163307
NSN: 3110-00-205-3722
FSC: 3110
CAGE: 21335 — TIMKEN CO DIV THE TIMKEN COMPANY (USA)
SPECIFICATIONS
materialRUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
hardness_rating65.0 SHORE DUROMETER A NOMINAL
outside_diameter1.679 INCHES MINIMUM AND 1.719 INCHES MAXIMUM IN
center_hole_diameter1.415 INCHES MINIMUM AND 1.427 INCHES MAXIMUM IN
cross-sectional_height0.135 INCHES MINIMUM AND 0.143 INCHES MAXIMUM IN
NSN3110-00-205-3722
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 10163307 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SURFACE FINISH: GROUND
•
STANDARD TOLERANCE DESIGNATION: ABEC NO.1
•
INTERNAL FIT-UP CONTACT ANGULAR DIRECTION: OUTWARD CONVERGENT
•
LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION: MIL-G-18709 MIL SPEC SINGLE MATERIAL RESPONSE
•
RETAINER FABRICATION METHOD: PRESSED
•
FEATURES PROVIDED: SNAP RING-GROOVE MOUNTING
•
BORE SHAPE: STRAIGHT
•
LUBRICATION MATERIAL: GREASE
TECHNICAL CHARACTERISTICS (FLIS)
SURFACE FINISHGROUND
STANDARD TOLERANCE DESIGNATIONABEC NO.1
INTERNAL FIT-UP CONTACT ANGULAR DIRECTIONOUTWARD CONVERGENT
LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATIONMIL-G-18709 MIL SPEC SINGLE MATERIAL RESPONSE
RETAINER FABRICATION METHODPRESSED
FEATURES PROVIDEDSNAP RING-GROOVE MOUNTING
BORE SHAPESTRAIGHT
LUBRICATION MATERIALGREASE
INTERNAL FIT-UP DESIGNATIONSTANDARD
LOAD DIRECTIONANGULAR
VERIFIED SUBSTITUTES & CROSS-REFERENCES 4
M59021-221Interchangeable
interchangeable cross-reference
interchangeable
AS3578-221Interchangeable
interchangeable cross-reference
interchangeable
PRP568-221-4024-65Interchangeable
interchangeable cross-reference
interchangeable
5305KGInterchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 10163307?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 10163307?
10163307 is a BEARING,BALL,ANNULAR.
What parts can replace 10163307?
There are 4 known substitutes for 10163307: M59021-221, AS3578-221, PRP568-221-4024-65 and 1 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 10163307?
10163307 is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-205-3722. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 10163307

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026