PartsTable
Technical Data Sheet
PartsTable / MRO / 10163160
10163160 ✓ Verified by PartsTable
— · MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

The BOOT,DUST AND MOISTURE SEAL is a the manufacturer industrial component. Key specifications include material: RUBBER SILICONE BODY, dome_height: 0.831 INCHES NOMINAL IN, thread_class: 2B, thread_length: 0.176 INCHES NOMINAL IN, thread_series: UNS, overall_height: 0.810 INCHES MINIMUM AND 1.891 INCHES MAXIMUM IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-00-215-6714, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 10163160
NSN: 5310-00-215-6714
FSC: 5310
CAGE: A486G — NIMIKKEISTOKESKUS NCB FINLAND (FIN)
SPECIFICATIONS
materialRUBBER SILICONE BODY
dome_height0.831 INCHES NOMINAL IN
thread_class2B
thread_length0.176 INCHES NOMINAL IN
thread_seriesUNS
overall_height0.810 INCHES MINIMUM AND 1.891 INCHES MAXIMUM IN
sealing_methodCOMPRESSION
mounting_methodTHREAD
style_designatorCLOSED END
material_thickness0.053 INCHES NOMINAL IN
width_across_flats0.625 INCHES NOMINAL IN
nominal_thread_size0.469 INCHES IN
NSN5310-00-215-6714
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 10163160 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
VERIFIED SUBSTITUTES & CROSS-REFERENCES 3
IN-103-RFIInterchangeable
interchangeable cross-reference
interchangeable
11-0404-0002Interchangeable
interchangeable cross-reference
interchangeable
952143-1Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 10163160?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 10163160?
10163160 is a BOOT,DUST AND MOISTURE SEAL. It is classified as a MRO (MRO_GENERAL).
What parts can replace 10163160?
There are 3 known substitutes for 10163160: IN-103-RFI, 11-0404-0002, 952143-1. Substitute compatibility should be verified for your specific system.
What is the NSN for 10163160?
10163160 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-00-215-6714. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 10163160

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026