PartsTable
Technical Data Sheet
Download PDF

10160980 — SEAL,NONMETALLIC SPECIAL SHAPED

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

10160980: SEAL,NONMETALLIC SPECIAL SHAPED.

SEAL,NONMETALLIC SPECIAL SHAPED. Key specifications include material: RUBBER SILICONE CLASS Q OVERALL, construction: SOLIDSOLID, aperture_width: 8.695 INCHES MINIMUM AND 8.695 INCHES MINIMUM AND 8.705 INCHES MAXIMUM8.705 INCHES MAXIMUM IN, aperture_length: 11.695 INCHES MINIMUM AND 11.695 INCHES MINIMUM AND 11.705 INCHES MAXIMUM11.705 INCHES MAXIMUM IN, style_designator: NON-CIRCULAR, attachment_method: ROUND HOLEROUND HOLE. This part is cataloged in the U.S.

Government catalog under NSN 5330-00-689-3787, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
10160980
NSN: 5330-00-689-3787
FSC: 5330 — Packing and Gasket Materials
CAGE: 18876 — US ARMY AVIATION AND MISSILE COMMAND (USA)
SPECIFICATIONS
materialRUBBER SILICONE CLASS Q OVERALL
constructionSOLIDSOLID
aperture_width8.695 INCHES MINIMUM AND 8.695 INCHES MINIMUM AND 8.705 INCHES MAXIMUM8.705 INCHES MAXIMUM IN
aperture_length11.695 INCHES MINIMUM AND 11.695 INCHES MINIMUM AND 11.705 INCHES MAXIMUM11.705 INCHES MAXIMUM IN
style_designatorNON-CIRCULAR
attachment_methodROUND HOLEROUND HOLE
fabrication_methodSOLIDSOLID
inside_corner_radius0.183 INCHES MINIMUM AND 0.183 INCHES MINIMUM AND 0.193 INCHES MAXIMUM0.193 INCHES MAXIMUM IN
outside_corner_radius0.557 INCHES MINIMUM AND 0.557 INCHES MINIMUM AND 0.567 INCHES MAXIMUM0.567 INCHES MAXIMUM IN
attachment_hole_diameter0.200 INCHES NOMINAL0.200 INCHES NOMINAL IN
attachment_feature_quantity1414
material_document_and_classificationZZ-R-765,CL 2B,GR 60 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
NSN5330-00-689-3787
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 10160980 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
ATTACHMENT HOLE DIAMETER: 0.200 INCHES NOMINAL0.200 INCHES NOMINAL IN
•
ATTACHMENT FEATURE QUANTITY: 1414
•
INSIDE CORNER RADIUS: 0.183 INCHES MINIMUM AND 0.183 INCHES MINIMUM AND 0.193 INCHES MAXIMUM0.193 INCHES MAXIMUM IN
•
STYLE DESIGNATOR: NON-CIRCULAR
•
MATERIAL DOCUMENT AND CLASSIFICATION: ZZ-R-765,CL 2B,GR 60 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
•
APERTURE WIDTH: 8.695 INCHES MINIMUM AND 8.695 INCHES MINIMUM AND 8.705 INCHES MAXIMUM8.705 INCHES MAXIMUM IN
•
APERTURE LENGTH: 11.695 INCHES MINIMUM AND 11.695 INCHES MINIMUM AND 11.705 INCHES MAXIMUM11.705 INCHES MAXIMUM IN
•
OUTSIDE CORNER RADIUS: 0.557 INCHES MINIMUM AND 0.557 INCHES MINIMUM AND 0.567 INCHES MAXIMUM0.567 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
ATTACHMENT HOLE DIAMETER0.200 INCHES NOMINAL0.200 INCHES NOMINAL IN
ATTACHMENT FEATURE QUANTITY1414
INSIDE CORNER RADIUS0.183 INCHES MINIMUM AND 0.183 INCHES MINIMUM AND 0.193 INCHES MAXIMUM0.193 INCHES MAXIMUM IN
STYLE DESIGNATORNON-CIRCULAR
MATERIAL DOCUMENT AND CLASSIFICATIONZZ-R-765,CL 2B,GR 60 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
APERTURE WIDTH8.695 INCHES MINIMUM AND 8.695 INCHES MINIMUM AND 8.705 INCHES MAXIMUM8.705 INCHES MAXIMUM IN
APERTURE LENGTH11.695 INCHES MINIMUM AND 11.695 INCHES MINIMUM AND 11.705 INCHES MAXIMUM11.705 INCHES MAXIMUM IN
OUTSIDE CORNER RADIUS0.557 INCHES MINIMUM AND 0.557 INCHES MINIMUM AND 0.567 INCHES MAXIMUM0.567 INCHES MAXIMUM IN
MATERIALRUBBER SILICONE CLASS Q OVERALL
FABRICATION METHODSOLIDSOLID
OTHER ITEMS IN FSC 5330 — Packing and Gasket Materials
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5330-00-000-0085 5330-00-000-0167 5330-00-000-5275 5330-00-001-1260 5330-00-001-1833 5330-00-001-1844 5330-00-001-1845 5330-00-001-1846
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 10160980?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 10160980?
10160980 is a SEAL,NONMETALLIC SPECIAL SHAPED.
What is the NSN for 10160980?
10160980 is cataloged in the U.S. Government catalog under NSN 5330-00-689-3787. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 10160980

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.