PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 10160848-1
10160848-1 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The CLAMP,LOOP is a the manufacturer industrial component. Key specifications include diameter: 0.199 INCHES NOMINAL IN, material: RUBBER CUSHION, lug_width: 1.125 INCHES NOMINAL IN, overall_width: 0.688 INCHES NOMINAL IN, style_designator: LEFT HAND CLAMP & BRACKET, tongue_hole_type: ROUND, UNTHREADED. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-514-1710, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
10160848-1
NSN: 5340-00-514-1710
FSC: 5340
CAGE: 19207 — U S ARMY TANK AUTOMOTIVE COMMAND AMSTA-IM-MM (USA)
SPECIFICATIONS
diameter0.199 INCHES NOMINAL IN
materialRUBBER CUSHION
lug_width1.125 INCHES NOMINAL IN
overall_width0.688 INCHES NOMINAL IN
style_designatorLEFT HAND CLAMP & BRACKET
tongue_hole_typeROUND, UNTHREADED
lug_hole_diameter0.199 INCHES NOMINAL IN
material_thickness0.051 INCHES NOMINAL IN
loop_inside_diameter0.750 INCHES NOMINAL IN
cushioning_environmental_protectionHEAT
distance_from_loop_center_to_tongue_end1.031 INCHES NOMINAL IN
center_to_center_distance_between_loop_and_lug_hole0.813 INCHES NOMINAL IN
NSN5340-00-514-1710
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 10160848-1 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL: RUBBER CUSHION
•
DISTANCE FROM LOOP CENTER TO TONGUE END: 1.031 INCHES NOMINAL IN
•
MATERIAL THICKNESS: 0.051 INCHES NOMINAL IN
•
LUG HOLE DIAMETER: 0.199 INCHES NOMINAL IN
•
CUSHIONING ENVIRONMENTAL PROTECTION: HEAT
•
CENTER TO CENTER DISTANCE BETWEEN FIRST AND SECOND HOLES: 0.625 INCHES NOMINAL IN
•
TONGUE HOLE TYPE: ROUND, UNTHREADED
TECHNICAL CHARACTERISTICS (FLIS)
MATERIALRUBBER CUSHION
OVERALL WIDTH0.688 INCHES NOMINAL IN
DISTANCE FROM LOOP CENTER TO TONGUE END1.031 INCHES NOMINAL IN
MATERIAL THICKNESS0.051 INCHES NOMINAL IN
LUG HOLE DIAMETER0.199 INCHES NOMINAL IN
CUSHIONING ENVIRONMENTAL PROTECTIONHEAT
CENTER TO CENTER DISTANCE BETWEEN FIRST AND SECOND HOLES0.625 INCHES NOMINAL IN
TONGUE HOLE TYPEROUND, UNTHREADED
LOOP INSIDE DIAMETER0.750 INCHES NOMINAL IN
STYLE DESIGNATORLEFT HAND CLAMP & BRACKET
VERIFIED SUBSTITUTES & CROSS-REFERENCES 6
701-701Interchangeable
interchangeable cross-reference
interchangeable
7680653Interchangeable
interchangeable cross-reference
interchangeable
76912Interchangeable
interchangeable cross-reference
interchangeable
20R9.00Interchangeable
interchangeable cross-reference
interchangeable
310-20Interchangeable
interchangeable cross-reference
interchangeable
6209000.2Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 10160848-1?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 10160848-1?
10160848-1 is a CLAMP,LOOP.
What parts can replace 10160848-1?
There are 6 known substitutes for 10160848-1: 701-701, 7680653, 76912 and 3 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 10160848-1?
10160848-1 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-514-1710. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 10160848-1

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026