PartsTable
Technical Data Sheet
Download PDF

10160380 — RESISTOR,FIXED,WIRE WOUND,INDUCT

✓ Government record, cited
— · MRO · MRO_GENERAL
PRODUCT OVERVIEW

10160380: RESISTOR,FIXED,WIRE WOUND,INDUCT.

RESISTOR,FIXED,WIRE WOUND,INDUCT. Key specifications include width: 1.375 INCHES NOMINAL IN, height: 0.375 INCHES NOMINAL IN, body_length: 0.437 INCHES MAXIMUM IN, body_diameter: 0.105 INCHES MINIMUM AND 0.125 INCHES MAXIMUM IN, terminal_type: WIRE LEAD, inclosure_type: ENCAPSULATED. This part is cataloged in the U.S.

Government catalog under NSN 5340-00-214-8241, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 10160380
NSN: 5340-00-214-8241
NIINs: 002148241, 011146489
FSC: 5340 — Hardware, Commercial
CAGE: 19207 — U S ARMY TANK AUTOMOTIVE COMMAND AMSTA-IM-MM (USA)
SPECIFICATIONS
width1.375 INCHES NOMINAL IN
height0.375 INCHES NOMINAL IN
body_length0.437 INCHES MAXIMUM IN
body_diameter0.105 INCHES MINIMUM AND 0.125 INCHES MAXIMUM IN
terminal_typeWIRE LEAD
inclosure_typeENCAPSULATED
terminal_length1.375 INCHES MINIMUM AND 1.625 INCHES MAXIMUM IN
special_featuresHOLE DIA 0.195/0.210 IN.;O/A LGTH 2.625 IN. NOM;C TO C DISTANCE BETWEEN HOLES 2 IN. IN
style_designatorAXIAL TERMINAL EACH END
countersink_angle50.0 DEGREES NOMINAL
surface_treatmentUNABLE TO DECODE
electrical_resistance196.000 OHMS
NSN5340-00-214-8241
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 10160380 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: UNABLE TO DECODE
•
HEIGHT: 0.375 INCHES NOMINAL IN
•
SURFACE TREATMENT: UNABLE TO DECODE
•
COUNTERSINK ANGLE: 50.0 DEGREES NOMINAL
•
WIDTH: 1.375 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONUNABLE TO DECODE
HEIGHT0.375 INCHES NOMINAL IN
SPECIAL FEATURESHOLE DIA 0.195/0.210 IN.;O/A LGTH 2.625 IN. NOM;C TO C DISTANCE BETWEEN HOLES 2 IN. IN
SURFACE TREATMENTUNABLE TO DECODE
COUNTERSINK ANGLE50.0 DEGREES NOMINAL
WIDTH1.375 INCHES NOMINAL IN
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Semi-active item — no replacement plannedNo demilitarization required
Ready to buy 10160380?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 10160380?
10160380 is a RESISTOR,FIXED,WIRE WOUND,INDUCT. It is classified as a MRO (MRO_GENERAL).
What is the NSN for 10160380?
10160380 is cataloged in the U.S. Government catalog under NSN 5340-00-214-8241. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 10160380

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.