PartsTable
Technical Data Sheet
Download PDF

10160344 — RESISTOR,FIXED,WIRE WOUND,INDUCT

✓ Government record, cited
— · MRO · MRO_GENERAL
PRODUCT OVERVIEW

10160344: RESISTOR,FIXED,WIRE WOUND,INDUCT.

RESISTOR,FIXED,WIRE WOUND,INDUCT. Key specifications include material: STEEL COMP 1116 OR STEEL COMP 1119 OVERALL, body_length: 0.437 INCHES NOMINAL IN, shank_length: 1.875 INCHES NOMINAL IN, thread_class: 2A A, body_diameter: 0.105 INCHES MINIMUM AND 0.125 INCHES MAXIMUM IN, cubic_measure: 0.005 CUBIC INCHES. This part is cataloged in the U.S.

Government catalog under NSN 5315-00-147-5371, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 10160344
NSN: 5315-00-147-5371
NIINs: 001475371, 011142229
FSC: 5315 — Nails, Machine Keys, and Pins
CAGE: 19207 — U S ARMY TANK AUTOMOTIVE COMMAND AMSTA-IM-MM (USA)
SPECIFICATIONS
materialSTEEL COMP 1116 OR STEEL COMP 1119 OVERALL
body_length0.437 INCHES NOMINAL IN
shank_length1.875 INCHES NOMINAL IN
thread_class2A A
body_diameter0.105 INCHES MINIMUM AND 0.125 INCHES MAXIMUM IN
cubic_measure0.005 CUBIC INCHES
terminal_typeWIRE LEAD
thread_length1.625 INCHES NOMINAL IN
inclosure_typeENCAPSULATED
overall_length5.000 INCHES NOMINAL IN
shank_diameter1.000 INCHES NOMINAL IN
first_end_styleSQUARE
NSN5315-00-147-5371
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 10160344 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SHANK DIAMETER: 1.000 INCHES NOMINAL IN
•
FIRST END LOCATION: BOTH ENDS
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TY 2,CL 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
•
THREAD LENGTH: 1.625 INCHES NOMINAL IN
•
FIRST END STYLE: SQUARE
•
HARDNESS RATING: 44.0 ROCKWELL C MINIMUM AND 50.0 ROCKWELL C MAXIMUM OVERALL
•
SHANK LENGTH: 1.875 INCHES NOMINAL IN
•
STYLE DESIGNATOR: SHOULDER
TECHNICAL CHARACTERISTICS
SHANK DIAMETER1.000 INCHES NOMINAL IN
FIRST END LOCATIONBOTH ENDS
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-416,TY 2,CL 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD LENGTH1.625 INCHES NOMINAL IN
FIRST END STYLESQUARE
HARDNESS RATING44.0 ROCKWELL C MINIMUM AND 50.0 ROCKWELL C MAXIMUM OVERALL
SHANK LENGTH1.875 INCHES NOMINAL IN
STYLE DESIGNATORSHOULDER
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-S-637 FED SPEC ALL MATERIAL RESPONSES OVERALL
OVERALL LENGTH5.000 INCHES NOMINAL IN
SUBSTITUTES & CROSS-REFERENCES 1
1016034Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 10160344?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 10160344?
10160344 is a RESISTOR,FIXED,WIRE WOUND,INDUCT. It is classified as a MRO (MRO_GENERAL).
What parts can replace 10160344?
There is 1 known substitute for 10160344: 1016034. Substitute compatibility should be verified for your specific system.
What is the NSN for 10160344?
10160344 is cataloged in the U.S. Government catalog under NSN 5315-00-147-5371. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 10160344

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.