PartsTable
Technical Data Sheet
Download PDF

10160333 — RESISTOR,FIXED,WIRE WOUND,INDUCT

✓ Government record, cited
— · MRO · MRO_GENERAL
PRODUCT OVERVIEW

10160333: RESISTOR,FIXED,WIRE WOUND,INDUCT.

RESISTOR,FIXED,WIRE WOUND,INDUCT. Key specifications include body_length: 0.437 INCHES MAXIMUM IN, body_diameter: 0.105 INCHES MINIMUM AND 0.125 INCHES MAXIMUM IN, cubic_measure: 0.005 CUBIC INCHES, terminal_type: WIRE LEAD, inclosure_type: ENCAPSULATED, terminal_length: 1.375 INCHES MINIMUM AND 1.625 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 4710-00-187-5031, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 10160333
NSN: 4710-00-187-5031
NIINs: 001875031, 011149320
FSC: 4710 — Pipe, Tube and Rigid Tubing
CAGE: 18876 — US ARMY AVIATION AND MISSILE COMMAND (USA)
SPECIFICATIONS
body_length0.437 INCHES MAXIMUM IN
body_diameter0.105 INCHES MINIMUM AND 0.125 INCHES MAXIMUM IN
cubic_measure0.005 CUBIC INCHES
terminal_typeWIRE LEAD
inclosure_typeENCAPSULATED
terminal_length1.375 INCHES MINIMUM AND 1.625 INCHES MAXIMUM IN
style_designatorAXIAL TERMINAL EACH END
electrical_resistance681.000 OHMS
reliability_indicatorNOT ESTABLISHED
unpackaged_unit_weight1.0 GRAMS G
end_item_identificationENGINE,GAS TURBINE
resistance_tolerance_in_percent-1.000 TO 1.000
NSN4710-00-187-5031
COMPONENT DIAGRAM
PIPE SECTION — SCHEDULE = WALL THICKNESS WALL: — OD: — LENGTH: — — — PN: 10160333 · OEM ⚠ VERIFY BEFORE ORDERING Schedule = wall thickness, NOT pipe diameter. Sch 40 and Sch 80 have the same OD but different wall thickness. Nominal pipe size ≠ actual OD — a 1" pipe is actually 1.315" OD ✓ BROKER TIP Sch 40 = standard wall, Sch 80 = heavy wall (higher pressure), Sch 160 = extra heavy. Seamless pipe is required for high-pressure applications — welded pipe has lower ratings PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
GENERAL CHARACTERISTICS ITEM DESCRIPTION: STEEL,CARBON,FED QQ-T-830,SEAMLESS TYPE,COMPOSITION 1010 TO 1020,ENAMEL OLIVE DRAB FINISH,5/32 IN. WALL THK BY 2-1/8 IN. OD ENDS,59-3/4 IN. LG,FOUR 1/4 IN. DIA HOLES EQUALLY SPACED ON OD AND 14 IN. DISTANCE FROM EA END IN
TECHNICAL CHARACTERISTICS
GENERAL CHARACTERISTICS ITEM DESCRIPTIONSTEEL,CARBON,FED QQ-T-830,SEAMLESS TYPE,COMPOSITION 1010 TO 1020,ENAMEL OLIVE DRAB FINISH,5/32 IN. WALL THK BY 2-1/8 IN. OD ENDS,59-3/4 IN. LG,FOUR 1/4 IN. DIA HOLES EQUALLY SPACED ON OD AND 14 IN. DISTANCE FROM EA END IN
SUBSTITUTES & CROSS-REFERENCES 1
1016333Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 10160333?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 10160333?
10160333 is a RESISTOR,FIXED,WIRE WOUND,INDUCT. It is classified as a MRO (MRO_GENERAL).
What parts can replace 10160333?
There is 1 known substitute for 10160333: 1016333. Substitute compatibility should be verified for your specific system.
What is the NSN for 10160333?
10160333 is cataloged in the U.S. Government catalog under NSN 4710-00-187-5031. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 10160333