PartsTable
Technical Data Sheet
Download PDF

10160332 — RESISTOR,FIXED,WIRE WOUND,INDUCT

✓ Government record, cited
— · MRO · MRO_GENERAL
PRODUCT OVERVIEW

10160332: RESISTOR,FIXED,WIRE WOUND,INDUCT.

RESISTOR,FIXED,WIRE WOUND,INDUCT. Key specifications include body_length: 0.437 INCHES MAXIMUM IN, body_diameter: 0.105 INCHES MINIMUM AND 0.125 INCHES MAXIMUM IN, cubic_measure: 0.003 CUBIC INCHES, terminal_type: WIRE LEAD, inclosure_type: ENCAPSULATED, terminal_length: 1.375 INCHES MINIMUM AND 1.625 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-00-451-8105, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 10160332
NSN: 5340-00-451-8105
NIINs: 004518105, 011149321
FSC: 5340 — Hardware, Commercial
CAGE: 19207 — U S ARMY TANK AUTOMOTIVE COMMAND AMSTA-IM-MM (USA)
SPECIFICATIONS
body_length0.437 INCHES MAXIMUM IN
body_diameter0.105 INCHES MINIMUM AND 0.125 INCHES MAXIMUM IN
cubic_measure0.003 CUBIC INCHES
terminal_typeWIRE LEAD
inclosure_typeENCAPSULATED
terminal_length1.375 INCHES MINIMUM AND 1.625 INCHES MAXIMUM IN
style_designatorAXIAL TERMINAL EACH END
electrical_resistance6.651 KILOHMS
reliability_indicatorNOT ESTABLISHED
unpackaged_unit_weight1.0 GRAMS G
end_item_identificationENGINE,GAS TURBINE
resistance_tolerance_in_percent-1.000 TO 1.000
NSN5340-00-451-8105
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 10160332 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
GENERAL CHARACTERISTICS ITEM DESCRIPTION: FUNCTIONS AS A TENSION SPRING FOROPENING AND CLOSING OF VEHICLE RAMP
TECHNICAL CHARACTERISTICS
GENERAL CHARACTERISTICS ITEM DESCRIPTIONFUNCTIONS AS A TENSION SPRING FOROPENING AND CLOSING OF VEHICLE RAMP
SUBSTITUTES & CROSS-REFERENCES 2
1029535Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
PL10290535Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 10160332?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 10160332?
10160332 is a RESISTOR,FIXED,WIRE WOUND,INDUCT. It is classified as a MRO (MRO_GENERAL).
What parts can replace 10160332?
There are 2 known substitutes for 10160332: 1029535, PL10290535. Substitute compatibility should be verified for your specific system.
What is the NSN for 10160332?
10160332 is cataloged in the U.S. Government catalog under NSN 5340-00-451-8105. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 10160332

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.