PartsTable
Technical Data Sheet
Download PDF

1016 798 C91 — SEAL,PLAIN ENCASED

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

1016 798 C91: SEAL,PLAIN ENCASED.

The SEAL,PLAIN ENCASED is a the manufacturer industrial component. Key specifications include material: RUBBER SYNTHETIC SEALING ELEMENT, case_style: RECESSED, seal_width: 0.359 INCHES MINIMUM AND 0.391 INCHES MAXIMUM IN, outside_diameter: 3.628 INCHES NOMINAL IN, surface_treatment: PLASTIC CASE, housing_bore_diameter: 3.626 INCHES MINIMUM AND 3.630 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5330-00-340-5378, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
1016 798 C91
NSN: 5330-00-340-5378
FSC: 5330 — Packing and Gasket Materials
CAGE: 29510 — KOMATSU AMERICAN INTL CO (USA)
SPECIFICATIONS
materialRUBBER SYNTHETIC SEALING ELEMENT
case_styleRECESSED
seal_width0.359 INCHES MINIMUM AND 0.391 INCHES MAXIMUM IN
outside_diameter3.628 INCHES NOMINAL IN
surface_treatmentPLASTIC CASE
housing_bore_diameter3.626 INCHES MINIMUM AND 3.630 INCHES MAXIMUM IN
sealing_element_styleVERTICAL
accommodated_shaft_diameter2.625 INCHES NOMINAL IN
NSN5330-00-340-5378
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 1016 798 C91 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SEAL WIDTH: 0.359 INCHES MINIMUM AND 0.391 INCHES MAXIMUM IN
•
SEALING ELEMENT STYLE: VERTICAL
•
OUTSIDE DIAMETER: 3.628 INCHES NOMINAL IN
•
HOUSING BORE DIAMETER: 3.626 INCHES MINIMUM AND 3.630 INCHES MAXIMUM IN
•
CASE STYLE: RECESSED
•
ACCOMMODATED SHAFT DIAMETER: 2.625 INCHES NOMINAL IN
•
SURFACE TREATMENT: PLASTIC CASE
•
MATERIAL: STEEL CASE
TECHNICAL CHARACTERISTICS
SEAL WIDTH0.359 INCHES MINIMUM AND 0.391 INCHES MAXIMUM IN
SEALING ELEMENT STYLEVERTICAL
OUTSIDE DIAMETER3.628 INCHES NOMINAL IN
HOUSING BORE DIAMETER3.626 INCHES MINIMUM AND 3.630 INCHES MAXIMUM IN
CASE STYLERECESSED
ACCOMMODATED SHAFT DIAMETER2.625 INCHES NOMINAL IN
SURFACE TREATMENTPLASTIC CASE
MATERIALSTEEL CASE
MATERIALRUBBER SYNTHETIC SEALING ELEMENT
SUBSTITUTES & CROSS-REFERENCES 5
2955 098Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
385-10167981Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
5330002398331Reference document
Same NSN cross-reference
Reference document — Informative reference only
475458Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
AT 16887Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 1016 798 C91?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 1016 798 C91?
1016 798 C91 is a SEAL,PLAIN ENCASED.
What parts can replace 1016 798 C91?
There are 5 known substitutes for 1016 798 C91: 2955 098, 385-10167981, 5330002398331 and 2 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 1016 798 C91?
1016 798 C91 is cataloged in the U.S. Government catalog under NSN 5330-00-340-5378. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 1016 798 C91