PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 10159520
10159520 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The BEARING,PLAIN,ROD END is a the manufacturer industrial component. Key specifications include material: STEEL COMP 440C INTERNAL ROD END BODY, shank_style: EXTERNALLY THREADED, thread_class: 3A A, bore_diameter: 0.2495 INCHES MINIMUM AND 0.2500 INCHES MAXIMUM IN, thread_diameter: 0.250 INCHES NOMINAL IN, style_designator: BALL TYPE. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-01-043-4260, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
10159520
NSN: 5330-01-043-4260
FSC: 5330
CAGE: 7X677 — GENERAL MOTORS LLC DBA GENERAL MOTORS LLC (USA)
SPECIFICATIONS
materialSTEEL COMP 440C INTERNAL ROD END BODY
shank_styleEXTERNALLY THREADED
thread_class3A A
bore_diameter0.2495 INCHES MINIMUM AND 0.2500 INCHES MAXIMUM IN
thread_diameter0.250 INCHES NOMINAL IN
style_designatorBALL TYPE
thread_directionRIGHT-HAND
inner_member_width0.3070 INCHES MINIMUM AND 0.3120 INCHES MAXIMUM IN
outer_member_width0.2450 INCHES MINIMUM AND 0.2550 INCHES MAXIMUM IN
shank_thread_length0.7550 INCHES MINIMUM AND 0.7750 INCHES MAXIMUM IN
thread_quantity_per_inch28
thread_series_designatorUNIFIED NATIONAL JOINT FINE (UNJF)
NSN5330-01-043-4260
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 10159520 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
DOCUMENT TYPE: INDUSTRIAL DRAWING
•
COMPONENT DOCUMENT ORIGIN: INDUSTRIAL
•
DOCUMENT SOURCE: 23862
•
DOCUMENT IDENTIFICATION: 328726
TECHNICAL CHARACTERISTICS (FLIS)
DOCUMENT TYPEINDUSTRIAL DRAWING
COMPONENT DOCUMENT ORIGININDUSTRIAL
DOCUMENT SOURCE23862
DOCUMENT IDENTIFICATION328726
VERIFIED SUBSTITUTES & CROSS-REFERENCES 6
FS1785Interchangeable
interchangeable cross-reference
interchangeable
Q12-8Interchangeable
interchangeable cross-reference
interchangeable
Q10BInterchangeable
interchangeable cross-reference
interchangeable
4061T89P01Interchangeable
interchangeable cross-reference
interchangeable
4061T89Interchangeable
interchangeable cross-reference
interchangeable
328726Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 10159520?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 10159520?
10159520 is a BEARING,PLAIN,ROD END.
What parts can replace 10159520?
There are 6 known substitutes for 10159520: FS1785, Q12-8, Q10B and 3 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 10159520?
10159520 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-01-043-4260. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 10159520

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026