PartsTable
Technical Data Sheet
Download PDF

10159494 — BEARING,BALL,ROD END

✓ Government record, cited
— · TAPERED BEARING
PRODUCT OVERVIEW

10159494: BEARING,BALL,ROD END.

The BEARING,BALL,ROD END is a the manufacturer industrial component. Key specifications include material: PLASTIC POLYTETRAFLUOROETHYLENE RETAINER, shank_style: EXTERNALLY THREADEDEXTERNALLY THREADED, thread_class: 3A3A, bore_diameter: 0.1900 INCHES MINIMUM AND 0.1900 INCHES MINIMUM AND 0.1905 INCHES MAXIMUM0.1905 INCHES MAXIMUM IN, alignment_type: RIGIDRIGID, shank_diameter: 0.1900 INCHES NOMINAL0.1900 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 3110-01-140-3770, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
10159494
NSN: 3110-01-140-3770
FSC: 3110 — Bearings, Antifriction, Unmounted
CAGE: A486G — NIMIKKEISTOKESKUS NCB FINLAND (FIN)
SPECIFICATIONS
materialPLASTIC POLYTETRAFLUOROETHYLENE RETAINER
shank_styleEXTERNALLY THREADEDEXTERNALLY THREADED
thread_class3A3A
bore_diameter0.1900 INCHES MINIMUM AND 0.1900 INCHES MINIMUM AND 0.1905 INCHES MAXIMUM0.1905 INCHES MAXIMUM IN
alignment_typeRIGIDRIGID
shank_diameter0.1900 INCHES NOMINAL0.1900 INCHES NOMINAL IN
inner_ring_width0.3070 INCHES MINIMUM AND 0.3070 INCHES MINIMUM AND 0.3120 INCHES MAXIMUM0.3120 INCHES MAXIMUM IN
outer_ring_width0.2450 INCHES MINIMUM AND 0.2450 INCHES MINIMUM AND 0.2550 INCHES MAXIMUM0.2550 INCHES MAXIMUM IN
special_featuresMICROINCH FINISH 64MICROINCH FINISH 64
style_designatorSINGLE ROW, BALLSINGLE ROW, BALL
thread_directionLEFT-HANDLEFT-HAND
nominal_thread_size0.190 INCHES0.190 INCHES IN
NSN3110-01-140-3770
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 10159494 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SHANK DIAMETER: 0.1900 INCHES NOMINAL0.1900 INCHES NOMINAL IN
•
SHANK THREAD LENGTH: 1.0000 INCHES MINIMUM1.0000 INCHES MINIMUM IN
•
OUTER RING WIDTH: 0.2450 INCHES MINIMUM AND 0.2450 INCHES MINIMUM AND 0.2550 INCHES MAXIMUM0.2550 INCHES MAXIMUM IN
•
STYLE DESIGNATOR: SINGLE ROW, BALLSINGLE ROW, BALL
•
OVERALL OUTSIDE DIAMETER: 0.6150 INCHES MINIMUM AND 0.6150 INCHES MINIMUM AND 0.6350 INCHES MAXIMUM0.6350 INCHES MAXIMUM IN
•
THREAD DIRECTION: LEFT-HANDLEFT-HAND
•
NOMINAL THREAD SIZE: 0.190 INCHES0.190 INCHES IN
•
SHANK STYLE: EXTERNALLY THREADEDEXTERNALLY THREADED
TECHNICAL CHARACTERISTICS
SHANK DIAMETER0.1900 INCHES NOMINAL0.1900 INCHES NOMINAL IN
SHANK THREAD LENGTH1.0000 INCHES MINIMUM1.0000 INCHES MINIMUM IN
OUTER RING WIDTH0.2450 INCHES MINIMUM AND 0.2450 INCHES MINIMUM AND 0.2550 INCHES MAXIMUM0.2550 INCHES MAXIMUM IN
STYLE DESIGNATORSINGLE ROW, BALLSINGLE ROW, BALL
OVERALL OUTSIDE DIAMETER0.6150 INCHES MINIMUM AND 0.6150 INCHES MINIMUM AND 0.6350 INCHES MAXIMUM0.6350 INCHES MAXIMUM IN
THREAD DIRECTIONLEFT-HANDLEFT-HAND
NOMINAL THREAD SIZE0.190 INCHES0.190 INCHES IN
SHANK STYLEEXTERNALLY THREADEDEXTERNALLY THREADED
ALIGNMENT TYPERIGIDRIGID
SPECIAL FEATURESMICROINCH FINISH 64MICROINCH FINISH 64
OTHER ITEMS IN FSC 3110 — Bearings, Antifriction, Unmounted
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
3110-00-001-1937 3110-00-001-1938 3110-00-001-4661 3110-00-001-4662 3110-00-001-4689 3110-00-001-4722
SUBSTITUTES & CROSS-REFERENCES 2
ADNEL3-305Reference document
Same NSN cross-reference
Reference document — Secondary reference
4062T11P01Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy 10159494?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 10159494?
10159494 is a BEARING,BALL,ROD END.
What parts can replace 10159494?
There are 2 known substitutes for 10159494: ADNEL3-305, 4062T11P01. Substitute compatibility should be verified for your specific system.
What is the NSN for 10159494?
10159494 is cataloged in the U.S. Government catalog under NSN 3110-01-140-3770. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 10159494

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.